Aerators & Adapters

The Original Softflo® Aerator is Pressure Compensating Design Fits Spouts with 13/16" - 24 Male Outlet. It is chrome plated with a 13/16"-24 UNS Female Inlet.

Pressure compensating 1.5 gpm

ECAST® construction with equal to or less than 0.25% lead content by weighted average

ASME A112.18.1/CSA B125.1 , NSF61

Water saving 1.5 GPM

The Perlator Faucet Aerator has a patented construction that provides a splash-free stream of well-aerated water that is soft to the touch. It is compatible with regular and vandal proof M22 & M24 metric housings. It is available in multiple finishes.

Integrated anti-liming Honeycomb replaces conventional wire mesh screens prone to lime build up

Reduces water flow to 1.8 gpm

Anit-clogging dome screen filters sediment and particles

Easy to clean

Color coded to identify flow rate and stream pattern

ASME A112.18.1/CSA B125.1 , NSF61

This aerator provides a splash-free, crystal clear (non-aerated) stream. It is pressure compensating for constant flow rate from 20 to 80 psi. This item is available in unplated, chrome and PVD and is vandal proof. It is ANSI/NSF Standard 61 & ASME A112.18.1M & VHA approved

Vandal Resitant

Laminar flow device creates soft water stream without drawing in surrounding air, reducing the risk of water contamination

Pressure compensating for constant flow rate and stream pattern

Integrated anti-liming Honeycomb replaces conventional wire mesh screens prone to lime build up

ASME A112.18.1/CSA B125.1 , NSF61

Anit-clogging dome screen filters sediment and particles

Snap fitting w/aerator, small diameter, dual thread, made of solid brass in the USA

Dual thread large diameter

Made of solid brass

Snap fitting w/aerator, large diameter, dual thread, made of solid brass in the USA

Dual thread large diameter

Made of solid brass

Faucet adapter, dual x 3/4" hose x aerator (dual 15/16"-27 or 55/64"-27 fem x 3/4" male hose or 55/64"-27 male), chr plated brass, bottom male thread on each fits a reg. Fem. threaded aerator, used to provide a MHT option w/ a standard aerator application

Bottom male thread on each fits a regular female threaded aerator

Used to provide a MHT option with a standard aerator application

Swivel and spray combo aerator, 15/16 dual thread, chrome and black finish, solid brass upper & lower body, 1.8 GPM energy, made in USA

Solid brass upper body and lower body

Dual thread built into upper body

1.8 gpm energy