Couplings

The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot.

The shield adjusts to a variety of a pipes diameters and circumferences-eliminating leak paths and the patented, bi-directional corrugation shield seals pressure in both parallel and transverse patterns on the gasket and pipe

Meeting the requirements of ASTM C564, the beaded gasket consists of an elastomeric compound with strategically positioned grooves and beads, when tightened, the shield attaches to the grooves to provide exceptional sealing p

The clamps feature a one-piece screw housing that mechanically interlocks to the band and this design eliminates leak paths that can occur in staked or welded clamps

Fastening the clamps to the shield, the floating eyelets allow the clamp, band and shield to move independently and this freedom prevents the shield from crimping and future leakage

5/16 Inch hex-head screw applies 60 Inch-lb of installation torque to the band/shield assembly

2 clamps per coupling

Corrosion-resistant, rustproof stainless steel shield and clamps

Preferred by professional plumbers nationwide

Packaged/sold individually

The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot.

The shield adjusts to a variety of a pipes diameters and circumferences-eliminating leak paths and the patented, bi-directional corrugation shield seals pressure in both parallel and transverse patterns on the gasket and pipe

Meeting the requirements of ASTM C564, the beaded gasket consists of an elastomeric compound with strategically positioned grooves and beads, when tightened, the shield attaches to the grooves to provide exceptional sealing p

The clamps feature a one-piece screw housing that mechanically interlocks to the band and this design eliminates leak paths that can occur in staked or welded clamps

Fastening the clamps to the shield, the floating eyelets allow the clamp, band and shield to move independently and this freedom prevents the shield from crimping and future leakage

5/16 Inch hex-head screw applies 60 Inch-lb of installation torque to the band/shield assembly

2 clamps per coupling

Corrosion-resistant, rustproof stainless steel shield and clamps

Preferred by professional plumbers nationwide

Packaged/sold individually

Fernco flexible couplings have found wide acceptance among sewer and plumbing contractors and municipalities because of their quality and ease of installation. Fernco couplings are used for all types of in-house and sewer connections, drain waste, vent piping, house-to-main, repairs, cut- ins, conductor and roof drains and increasers-reducers. Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material. And theyre leak proof, root proof and seal against infiltration and exfiltration.

Leakproof and rootproof for under ground applications

Positive seal against infiltration and exfiltration

Stainless steel clamps are corrosion-resistant and rustproof

Connect pipes of same or different sizes and materials

Top quality rubber

300 series stainless steel clamps included

Fast, easy installation

Fernco flexible couplings have found wide acceptance among sewer and plumbing contractors and municipalities because of their quality and ease of installation. Fernco couplings are used for all types of in-house and sewer connections, drain waste, vent piping, house-to-main, repairs, cut- ins, conductor and roof drains and increasers-reducers. Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material. And theyre leak proof, root proof and seal against infiltration and exfiltration.

Positive seal against infiltration and exfiltration

Leakproof and rootproof for under ground applications

Connect pipes of same or different sizes and materials

Stainless steel clamps are corrosion-resistant and rustproof

300 series stainless steel clamps included

Top quality rubber

Fast, easy installation

Fernco flexible couplings have found wide acceptance among sewer and plumbing contractors and municipalities because of their quality and ease of installation. Fernco couplings are used for all types of in-house and sewer connections, drain waste, vent piping, house-to-main, repairs, cut- ins, conductor and roof drains and increasers-reducers. Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material. And theyre leak proof, root proof and seal against infiltration and exfiltration.

Positive seal against infiltration and exfiltration

Leakproof and rootproof for under ground applications

Connect pipes of same or different sizes and materials

Stainless steel clamps are corrosion-resistant and rustproof

300 series stainless steel clamps included

Top quality rubber

Fast, easy installation

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - PROFLEX connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

Neoprene rubber gasket and corrosion-resistant, rustproof stainless steel shield and clamps

Packaged/sold individually

Made in USA

Fernco flexible couplings have found wide acceptance among sewer and plumbing contractors and municipalities because of their quality and ease of installation. Fernco couplings are used for all types of in-house and sewer connections, drain waste, vent piping, house-to-main, repairs, cut- ins, conductor and roof drains and increasers-reducers. Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material. And theyre leak proof, root proof and seal against infiltration and exfiltration.

Positive seal against infiltration and exfiltration

Leakproof and rootproof for under ground applications

Connect pipes of same or different sizes and materials

Stainless steel clamps are corrosion-resistant and rustproof

300 series stainless steel clamps included

Top quality rubber

Fast, easy installation

Fernco tubular drain pipe connectors offer a quick, easy way to extend, alter or repair any combination of 1-1/2 or 1-1/4 Inch (32 or 38 mm) brass or plastic drain pipe. Whether you’re connecting brass to brass, plastic to plastic, or brass to plastic, you get an economical, leak free seal. Installation is fast and simple. The flexible elastomeric PVC material is formulated for drain use and provides a strong, reliable connection that’s made in minutes, but lasts for years.

Alter or repairs any combination of brass or plastic drain pipe

Connects pipes of the same or different sizes and materials

Stainless steel clamps

Formulated for drain use to provide a strong, long-lasting and reliable connection

Ability to be cut shorter for limited space pipe connections

Top quality rubber

Fast, easy installation

Leak and toot proof

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - ProFlex connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

301 stainless steel 0.025 Inch thickness x 0.5 Inch wide clamp

305 stainless steel 5/16 Inch hex no slot screw and eyelet

Made in USA

301 stainless steel 0.012 Inch thickness x 2.125 Inch wide shield

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - PROFLEX connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

Neoprene rubber gasket and corrosion-resistant, rustproof stainless steel shield and clamps

Packaged/sold individually

Made in USA

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - ProFlex connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

Neoprene rubber gasket and corrosion-resistant, rustproof stainless steel shield and clamps

Packaged/sold individually

Made in USA

Proflex is a shielded transition pipe coupling that allows you to make pipe connections that are resistant to shear forces, while creating a rigid, long lasting pipe joint. Proflex connects cast iron, plastic, steel, copper and tubular, drain waste and vent systems for ground applications.

Riveted construction

Rubber gasket for a tight connection to prevent leaks

Strong, durable PVC construction makes this fitting the perfect choice for your project

Resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - PROFLEX connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

Neoprene rubber gasket and corrosion-resistant, rustproof stainless steel shield and clamps

Packaged/sold individually

Made in USA

Fernco flexible couplings have found wide acceptance among sewer and plumbing contractors and municipalities because of their quality and ease of installation. Fernco couplings are used for all types of in-house and sewer connections, drain waste, vent piping, house-to-main, repairs, cut- ins, conductor and roof drains and increasers-reducers. Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material. And theyre leak proof, root proof and seal against infiltration and exfiltration.

Positive seal against infiltration and exfiltration

Leak proof and root proof for under ground applications

Connect pipes of same or different sizes and materials

Stainless steel clamps are corrosion-resistant and rustproof

300 series stainless steel clamp included

Fast, easy installation

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - ProFlex connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

305 stainless steel 5/16 Inch hex no slot screw and eyelet

301 stainless steel 0.025 Inch thickness x 0.5 Inch wide clamp

301 stainless steel 0.012 Inch thickness x 2.125 Inch wide shield

Made in USA

The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot.

The shield adjusts to a variety of a pipes diameters and circumferences-eliminating leak paths and the patented, bi-directional corrugation shield seals pressure in both parallel and transverse patterns on the gasket and pipe

Meeting the requirements of ASTM C564, the beaded gasket consists of an elastomeric compound with strategically positioned grooves and beads, when tightened, the shield attaches to the grooves to provide exceptional sealing p

The clamps feature a one-piece screw housing that mechanically interlocks to the band and this design eliminates leak paths that can occur in staked or welded clamps

Fastening the clamps to the shield, the floating eyelets allow the clamp, band and shield to move independently and this freedom prevents the shield from crimping and future leakage

5/16 Inch hex-head screw applies 60 Inch-lb of installation torque to the band/shield assembly

2 clamps per coupling

Corrosion-resistant, rustproof stainless steel shield and clamps

Preferred by professional plumbers nationwide

Packaged/sold individually

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. From 1-1/2 - 8 Inch - PROFLEX connects cast iron, plastic, steel, copper and tubular drain waste and vent systems.

Neoprene rubber gasket and corrosion-resistant, rustproof stainless steel shield and clamps

Packaged/sold individually

Made in USA