Drinking Fountains & Water Coolers

The HAC8FS-Q-SS Water cooler is a single level unit with front and side push bars. It is constructed of stainless steel. The Halsey Taylor HAC8FS series is an ADA compliant drinking fountain line. The series meets both child and adult ADA standards. HAC drinking fountains feature push bars with raised letters for the visually impaired.

Fine mesh strainer on water inlet line

Easy-to-operate front and side pushbars

Large backplate opening for easy rough-ins

Access to trap without removing side panels

Stainless steel panels resist wear and corrosion, durable satin finish helps hide water spots and fingerprints

Non-corrosive stainless steel cooler top, 300 series with satin finish resists stains and corrosion and is easy to maintain, anti-splash ridge reduces splatter, contoured to insure proper drainage

Exclusive one-piece, chrome-plated two stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self-closing light-touch push bars on front and sides with raised letters for the visually impaired

Self-closing assembly is located inside unit to prevent tampering, unit resists corrosion and liming, a constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water, factory set at 50 deg F adjustable +/-5 deg F

Non-pressurized stainless steel evaporator/storage tank for long life, waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser, sy

Insure proper ventilation by maintaining 6 Inch minimum clearance from cabinet louvers to wall

Model A171108F is a self-contained, vandal resistant pressure water cooler that shall deliver a minimum of 8 gph of water at 50 deg F cooled from 80 deg F inlet water and 90 deg F ambient. Unit shall be activated from an anti-microbial front pushbutton using less than 5 lb of force. Bubbler shall be low flow and have an flexible guard with an integrally designed non-squirt feature and operate on a water pressure range of 20 - 105 psig. Basin shall be constructed from 304 stainless steel and have an integral drain. Cabinet shall be Granite powder coated on galvanized or stainless steel. Cooling system shall use R-134a refrigerant and be capillary tube controlled. An adjustable thermostat with an off position shall control the refrigeration system. Unit shall be listed by Underwriters Laboratories for both the US and Canada, compliant to the Air Conditioning and Refrigeration Institute Standard 1010. Unit is certified to ANSI A117.1 and ANSI/NSF 61, Section 9 requirements and CHSC 1162875. Fixture meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately.

Granite powder coated apron and one-piece bottom wrapper

Flexible, low flow, anti-microbial antirotation, non-squirt bubbler

100 mesh inlet strainer

Vandal resistant screws

Hanging bracket provided

Auto-stop allows cartridge and strainer service without shutting off water supply

With maintenance advantage

Self-contained, electric refrigerated wall-mounted water cooler designed to be easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements as defined by the Americans with Disabilities Act for both children or adults. Unit is certified to NSF/ANSI 61, and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient. Unit is UL listed for indoor and outdoor service.

Built in USA

Features tamper-resistant pushbutton activation and one-piece bubbler

Stainless steel panels resists wear and corrosion

Durable satin finish helps hide water spots and fingerprints

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Separate valve and automatic stream regulator shall be mounted within cabinet

Wall-mount water cooler with easy-clean and anti-splash rin basin. Pushbutton activation with an exclusive Halsey Taylor Double Bubbler™. Self-contained, electric refrigerated wall-mounted water cooler easily accessible to physically challenged individuals. Models WM8A-*,WM14A-Q, and WM16A-Q* deliver 7.6 - 15.5 gph of 50 deg F drinking water at 90 deg F ambient air and 80 deg F inlet water. Model WM-3 L/R* delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated two-stream Double Bubbler™ with non-removable anti-squirt feature and integral hood. Automatic stream height regulator is located inside unit to prevent tampering. Includes self-closing, vandal-resistant pushbutton does not require grasping or twisting. Type 300 series stainless steel cooler top, with satin finish resists stains. Contoured to insure proper drainage. Unit shall be lead-free design which is certified to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and CAN/CSA 22.2 No. 120.

Attractive styling blends with any décor

Easy-clean, anti-splash rim basin

Mounts with all connections concealed

Air condenser cooling

Built in USA

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Extra deep basin minimizes splashing; with integral drain

Exclusive one-piece, chrome-plated two stream Double Bubbler™ with non-removable anti-squirt feature and integral hood

It’s integral hood insures a satisfying drink of water

Flow regulator provides constant stream from 20 - 105 psi water pressure

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Inlet: 3/8 Inch OD tubing

1-1/4 Inch tube outlet for 1-1/4 Inch slip joint connection

Trap and service stop not included

Wall-mount water cooler with easy-clean and anti-splash rin basin. Pushbutton activation with an exclusive Halsey Taylor Double Bubbler™. Self-contained, electric refrigerated wall-mounted water cooler easily accessible to physically challenged individuals. Models WM8A-*,WM14A-Q, and WM16A-Q* deliver 7.6–15.5 gph of 50°F drinking water at 90°F ambient air and 80°F inlet water. Model WM-3 L/R* delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated two-stream Double Bubbler™ with non-removable anti-squirt feature and integral hood. Automatic stream height regulator is located inside unit to prevent tampering. Includes self-closing, vandal-resistant pushbutton does not require grasping or twisting. Type 300 series stainless steel cooler top, with satin finish resists stains. Contoured to insure proper drainage. Unit shall be lead-free design which is certified to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and CAN/CSA 22.2 No. 120.

Attractive styling blends with any décor

Easy-clean, anti-splash rim basin

Mounts with all connections concealed

Air condenser cooling

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Extra deep basin minimizes splashing; with integral drain

Exclusive one-piece, chrome-plated two stream Double Bubbler™ with non-removable anti-squirt feature and integral hood, it’s integral hood insures a satisfying drink of water

Flow regulator provides constant stream from 20 - 105 psi water pressure

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

3/8 Inch OD tubing water inlet

1-1/4 Inch tube outlet for 1-1/4 Inch slip joint connection

Compressor: Hermetically-sealed, reciprocating type, single phase

Condenser: Fan cooled, copper tube with aluminum fins

Fan motor is permanently lubricated

Wall-mount water cooler with one-piece stainless steel basin with backsplash. Easy-to-operate front and side pushbars with raised letters to assist the visually impaired. Self-contained, electric refrigerated wall-mounted water cooler designed to be easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements as defined by the Americans with Disabilities Act. Unit is certified to NSF/ANSI 61 and 372 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

One piece stainless steel backsplash and basin

Front and side pushbars

Standard finish is platinum vinyl

Non-filtered, non-refrigerated

Made in USA

Heavy-gauge vinyl clad steel, resistant to wear, moisture, perspiration, heat, and sunlight

Type 300 series stainless steel cooler top, with satin finish resists stains, anti-splash ridge reduces splatter, contoured to insure proper drainage

Exclusive one-piece, chrome-plated two stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self-closing light-touch push bars with raised letters for the visually impaired

Self-closing assembly is located inside unit to prevent tampering, unit resists corrosion and liming, a constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water, factory set at 50 deg F adjustable +/-5 deg F

Tube-type, non-pressurized copper water cooling coil, waterways are certified to NSF/ANSI 61 and 372, far exceeding the requirements of the Safe Drinking Water Act

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser. System uses R134A refrigerant. Protected by Hals

Self-contained, electric refrigerated, wall-mounted water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F

Built in USA, wall-mount water cooler with easy-clean and anti-splash rin basin

Heavy-gauge vinyl clad steel

Resistant to wear, moisture, perspiration, heat and sunlight

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Self-contained, electric refrigerated, wall-mounted water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F

Built in USA, wall-mount water cooler with easy-clean and anti-splash rin basin

Heavy-gauge vinyl clad steel

Resistant to wear, moisture, perspiration, heat and sunlight

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Self-contained, electric refrigerated, wall-mounted water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F

Built in USA, wall-mount water cooler with easy-clean and anti-splash rin basin

Stainless steel panels resists wear and corrosion

Durable satin finish helps hide water spots and fingerprints

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Modular, electric refrigerated, fully-recessed wall-mounted water cooler. water at 80 deg F inlet water and 90 deg F ambient.

Built in USA

One-piece, non-corrosive stainless steel cooler top, number 300 series with satin finish and contour-formed basin

Bubbler: Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

Unit resists corrosion and liming

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Pushbutton actuation mechanism - self closing, vandal-resistant pushbutton does not require grasping or twisting

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Refrigeration system - protected by Halsey Taylor’s limited 5-year warranty

Mounting frame is manufactured of corrosion resistant, galvanized steel

Open construction designed for ease of installation

Mounting frame can be shipped in advance for rough-in installation

Cooling unit contained in a heavy gauge galvanized steel cabinet with front and rear panels removable for service

Self-contained, electric refrigerated wall-mounted water cooler designed to be easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements as defined by the Americans with Disabilities Act for both children or adults. Unit is certified to NSF/ANSI 61, and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient. Unit is UL listed for indoor and outdoor service.

Built in USA

Features tamper-resistant pushbutton activation and one-piece bubbler

Stainless steel panels resists wear and corrosion

Durable satin finish helps hide water spots and fingerprints

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Separate valve and automatic stream regulator shall be mounted within cabinet

Freestanding floor-mount water cooler with easy-clean and anti-splash rin basin. Pushbutton activation with an exclusive Halsey Taylor Double Bubbler™. Self-contained, electric refrigerated, free-standing water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

Built in USA

Cabinet: Heavy-gauge vinyl clad steel, resistant to wear, moisture, perspiration, heat, and sunlight

Cooler top: Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Bubbler: Vandal-resistant projector is one-piece, chrome-plated

Unit has integral hood guard design to prevent contamination from other users, airborne deposits and tampering

Pushbutton actuation mechanism - self closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

Unit resists corrosion and liming

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Temperature control - positive sensing thermostat for controlling temperature of storage tank water

Storage tank - non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Refrigeration system - protected by Halsey Taylor’s limited 5-year warranty

OVL-II™ architectural drinking fountains feature sleek styling with a contoured oval basin designed to provide a splash-resistant surface. Modular, electric refrigerated, bi-level wall-mounted water cooler designed to be easily accessible to physically challenged and able-bodied individuals. When properly installed, unit meets state and federal requirements as defined by the Americans with Disabilities Act. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

Built in USA

Oval shape fountain, non-corrosive stainless steel, with brushed satin finish

Contour-formed basin with rounded corners and edges

Oval fountain shape requires less neck extension and bending for the wheel chair user

Bubbler: Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

Unit resists corrosion and liming

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Push bar actuation mechanism - self-closing, semi-circular push bar can be actuated at any point on its 180 deg radius

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Refrigeration system - protected by Halsey Taylor’s limited 5-year warranty

Mounting frame is manufactured of corrosion resistant, galvanized steel

Open construction designed for ease of installation

Self-contained, electric refrigerated, free-standing water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

Built in USA

Heavy-gauge vinyl clad steel

Resistant to wear, moisture, perspiration, heat and sunlight

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Waste and supply lines secured to back of cabinet; waste 1-1/4 Inch supply 3/8 Inch tubing

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Self-contained, electric refrigerated, bi-level wall-mounted water cooler designed to be easily accessible to physically challenged individuals. When properly installed, unit on right side meets state and federal requirements for both children or adults as defined by the Americans with Disabilities Act. Unit is certified to NSF/ANSI 61, and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient. Unit is UL listed for indoor and outdoor service.

Built in USA

Stainless steel panels resists wear and corrosion

Durable satin finish helps hide water spots and fingerprints

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Vandal-resistant bubbler is one-piece, chrome-plated, with integral hood guard design to prevent contamination from other users, airborne deposits and tampering

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Separate valve and automatic stream regulator shall be mounted within cabinet

Wall-mount water cooler with easy-clean and anti-splash rin basin. Pushbutton activation with an exclusive Halsey Taylor Double Bubbler™. Self-contained, electric refrigerated Bi-Level wall-mounted water cooler easily accessible to physically challenged individuals. Models WM14A-4-BL-Q*, and WM16A-3-BL-Q* deliver 13.5 - 15.5 gph of 50 deg F drinking water at 90 deg F ambient air and 80 deg F inlet water. Exclusive one-piece, chrome-plated two-stream Double Bubbler™ with non-removable anti-squirt feature and integral hood. Automatic stream height regulator is located inside unit to prevent tampering. Includes self-closing, vandal-resistant pushbutton does not require grasping or twisting. Type 300 series stainless steel cooler top, with satin finish resists stains. Contoured to insure proper drainage. Unit shall be lead-free design which is certified to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and CAN/CSA 22.2 No. 120.

Easy-clean, anti-splash rim basin

Factory-supplied cabinet-to-cabinet mounting system

Air condenser cooling

Built in USA

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Extra deep basin minimizes splashing; with integral drain

Exclusive one-piece, chrome-plated two stream Double Bubbler™ with non-removable anti-squirt feature and integral hood

It’s integral hood insures a satisfying drink of water

Flow regulator provides constant stream from 20 - 105 psi water pressure

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Inlet: 3/8 Inch OD tubing

Outlet - 1-1/2 Inch tube outlet for 1-1/2 Inch slip joint connection

Compressor: Hermetically-sealed, reciprocating type, single phase, sealed-in lifetime lubrication

Condenser: Fan cooled, copper tube with aluminum fins, fan motor is permanently lubricated

Wall-mount water cooler with easy-clean and anti-splash rin basin. Pushbutton activation with an exclusive Halsey Taylor Double Bubbler™. Halsey Taylor water cooler with filter is equipped with the Water Sentry HWF 172 lead reduction system which is designed to remove cysts, such as cryptrosporidium and giardia, lead particles and chlorine. Also reduces odors and discoloration from incoming water. The filter has been tested to the following NSF International standards: NSF/ANSI Standards 42 chlorine, particulate, and taste and odor. NSF/ANSI standard 53 for reduction of lead and cyst. Features include quick-disconnect 1/4 turn installation. Has automatic inlet shut-off valve that closes when filter is removed. Filter should be replaced every 1500 gal (5678 liters) or approximately one (1) year after installation. Use part number 55897C when ordering replacement filter.

Equipped with lead reduction system designed to remove cysts, lead particles and chlorine

Easy-clean, anti-splash rim basin

Mounts with all connections concealed

Air condenser cooling

Heavy-gauge vinyl clad steel cabinet

Resistant to wear, moisture, perspiration, heat and sunlight

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Exclusive one-piece, chrome-plated two stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Self-contained, electric refrigerated, free-standing water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

Built in USA

Heavy-gauge vinyl clad steel

Resistant to wear, moisture, perspiration, heat and sunlight

Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain

Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Self-closing, vandal-resistant pushbutton does not require grasping or twisting

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Positive sensing thermostat for controlling temperature of storage tank water

Non-pressurized stainless steel evaporator/storage tank for long life

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser

Insure proper ventilation by maintaining 6 Inch (152 mm) minimum clearance from cabinet louvers to wall

Shall have stainless steel basin with removable drain strainer

Simulated semi-recess design water cooler with one-piece stainless steel basin and backsplash. Front pushbutton activation with exclusive Halsey Taylor Double Bubbler™. Self-contained, electric refrigerated, simulate drecessed wall-mounted water cooler designed to be easily accessible to able-bodied individuals. Unit is certified to NSF/ANSI 61and 372, and meets requirements of the Safe Drinking Water Act. Unit provides 50 deg F water at 80 deg F inlet water and 90 deg F ambient.

Mechanical push-button bubbler activation continues to provide water when electrical service is interrupted.

Exclusive Double Bubbler provides a satisfying and more fulfilling drink of water.

Stainless steel finish is corrosion resistant and attractive.

Provides cold water without intruding into wall.

Rated for indoor use.

OVL-II™ architectural drinking fountains feature sleek styling with a contoured oval basin designed to provide a splash-resistant surface. Modular, electric refrigerated, wall-mounted water cooler designed to be easily accessible to physically challenged

Built in USA

Oval shape fountain, non-corrosive stainless steel, with brushed satin finish

Contour-formed basin with rounded corners and edges

Oval fountain shape requires less neck extension and bending for the wheel chair user

Bubbler: Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water

Automatic stream height regulator: Self-closing assembly is located inside unit to prevent tampering

Unit resists corrosion and liming

A constant stream height is automatically maintained under line pressures that vary from 20 - 105 psi

Automatic actuation: Model OVL-II™EREE-Q features infra-red light beam emitting sensor and a solenoid valve

Upon interruption of the light beam, the sensor actuates the solenoid valve to flow water

User does not have to touch the water cooler to obtain a drink of water

Supplied with a built-in time delay to avoid nuisance actuation from passers-by

Inlet strainer - easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway

Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser