In the event of a chemical eye burn, panic ensues. Our senses are rendered and instinct naturally takes over. Our reflexes instantly rush us to the nearest location of relief-the sink, safety showers, eyewash stations, etc.
However, with the introduction of "faucet-mounted" eyewash stations, victims can inadvertently flush scalding-hot water into their eyes in a moment of confusion, causing more harm than good. Speakman Eyesaver Single Post Laboratory Eyewash Faucets, are a revolutionary product line that combines a single post lab faucet with an independently operated eyewash. With a simple pull of the lever, water will instantly flush into the eyes of a burn victim. Two separate water supplies ensure that cold to tepid water will bring relief to the victim, regardless if hot water is being run from the sink simultaneously. The single-post mount design will save valuable laboratory counter space and require no additional space to be installed. Eyewash features 2 gpm flow rate at 30 PSI while faucet features 1.5 gpm flow rate. Certified to ANSI/ISEA Z358.1, ASME A112.18.1/CSA B125.1, NSF 61 & NSF 372.Single post faucet with integrated eyewashDual aerated spray heads with flip top capsEyewash is lift handle activatedTepid water readyANSI/ISEA Z358.1 Certified