Fire Safety

The Kidde i9050 is powered by a 9V battery providing continuous operation in the event of a power failure. Designed with an Ionization smoke sensor, the alarm may detect a fire sooner than alarms employing photoelectric sensors. A flashing led to verify the alarm is receiving power and test button help ensure the alarm is operational.

Powered By 9V battery providing uninterrupted protection in case of power outages

Easy Installation with no wiring required

Test Button verifies alarm is operational

Flashing LED verifies unit is receiving power

Tamper Resist Feature

Ionization Sensing Technology

The BRK Brands, Inc. model number 9120B is a wire-in, 120V AC 60Hz single and/ or multiple station smoke alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. The 9120B complies with UL217, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC with Silence smoke alarms are required. The alarms are interconnectable with up to 18 devices, of which 12 can be smoke alarms. The BRK® 9120B alarm features a dual ionization smoke sensing chamber, an 85dB horn, 9V battery backup and a 'silence' feature. The Smart Technology system is designed to reduce nuisance alarms. Latching Alarm Indication remembers which unit initiated an alarm. When interconnected in a series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or 'latch' the information and begin to flash the LED indicator 2 seconds on, 2 seconds off. The 'Perfect Mount' system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. Other Contractor Preferred features include a dust cover to keep alarm clean during construction, keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a 'QuickConnect' wiring harness. Installation is quick, easy and cost effective.

Tamper resistant locking pins

Latching alarm indication

Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation

Single button test/silence

Powered by 120V AC, 60Hz and has a monitored 9V battery backup

Unit meets the requirements of UL217, CSFM, NFPA 72, NFPA 101, ICC, ICBO, BOCA, SBCCI and CABO.

The Kidde FA110 Multipurpose Fire Extinguisher is UL rated 1-A:10-B:C, and it is designed to fight basic fires common to the home, including those involving fabrics, plastics, wood, flammable liquids, and electrical equipment. It is fitted with an easy-to-read pressure gauge that tells you the fire extinguisher is charged. A clear instruction label clearly shows the steps required to operate the extinguisher.

Multi-purpose dry chemical

Supplied with retention strap bracket

Monoammonium phosphate

Suitable for use on trash, wood, paper, liquid and electrical fires

Easy-to-read gauge tells you fire extinguisher is charged and ready for use

Clear instruction label using graphics to show steps required to operate extinguisher

Easy-to-pull safety pin

Rust and impact resistant nylon handle

2.5 lb. of fire extinguishing agent (Average)

UL approved strap retention bracket

Coast guard (U.S.C.G) approved when fitted with supplied mounting bracket

6-year limited warranty

The Kidde i9060 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a smoke or fire incident. The i9060 operates on a 9V battery power source that provides continuous protection even during a power outage. Installation is simple with the Twist-Off Mounting Plate and requires no wiring. The i9060 includes a Tamper Resist Locking Pin that helps deter battery and alarm theft and a Hush® control feature that will temporarily silence nuisance alarms. This feature is useful in the kitchen area or other areas prone to nuisance alarms. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

Hush® Feature Temporarily silences nuisance alarms.

Red LED Flashes every 30-40 seconds to indicate that the smoke alarm is receiving power.

Test Button - Tests unit's electronic circuitry, horn, and battery function

Battery Operated (9V battery included) - Protects even during power outages.

Tamper Resist Locking Pin - Helps deter from theft or tampering

Low Battery Indicator - Smoke alarm will chirp in the event of a low battery.

Twist-Off Mounting - For fast installation and easy, safe battery replacement.

Includes 9V Carbon Zinc Battery

SmokeCheck® tests both photoelectric and ionization smoke detectors to ensure circuitry, alarm and power is functioning and they are actively sampling the air for any hint of a fire. This smoke detector tester is 100% EPA compliant and environmentally friendly. Designed, and suitable for testing smoke detector function per NFPA 72 Chapter 14 and when used as directed, our formula simulates the entire range of fire conditions - giving you confidence to know your fire alarm system will respond promptly to all fire conditions.

100% EPA compliant, even with new codes and protocols

Always environmentally friendly: no HFCs or CFCs and low-odor

Economical: 300+ tests per can

Safe on sensors

For use with both open and enclosed delivery Versa-Tools®