Floor Drains

2" x 3" Low Profile PVC Drain, Screw-On Chrome Plated Brass Strainer

Square heavy duty cover all screw-on chromed brass strainer

Solvent weld or no caulk installation

Tongue and groove clamping collar

Bevelled edge for recessed installation

2 x 3 Inch solvent weld

2" Low Profile PVC Drain, No Caulk, Stainless Steel Screw-On Strainer

Round cover all screw-on stainless steel strainer

No-caulk gasket

Tongue and groove clamping collar

Bevelled edge for recessed installation

2 x 3 Inch solvent weld

Sioux Chief 800 Series Weld One integral trap floor drain shall be used where necessary in drainage systems. Drain shall have a 2 Inch Sch. 40 hub connection which conforms to ASTM D2665 (PVC) or ASTM D2661 (ABS). Hub connection shall be designed with proper pitch to insure grate remains level after connection. Drain trap shall be properly sized, and smoothsweep, to insure full flow and reduce sediment buildup. Drain shall employ a full 3 Inch trap seal. Drain shall have a factory plugged cleanout access inside sump area. Strainer shall meet applicable load and flow requirements for intended use. Trap primer port shall be threaded 1/2 FIP for knockout connection.

Proven performance, improved design

Drain body is sonic welded - not glued

Deeper outlet reduces slab cracks

Threaded, 1/2 Inch FIP knockout trap primer port

Outlet provides proper slope to connecting pipe

PVC or ABS solvent weld connection

Patent No. D587,787

Floor drain, ABS, one piece drain body, polypropylene strainer with 2 stainless steel screws, 2" integral "P" trap and solvent weld hub conn, 1-1/2" concealed factory plugged cleanout, 2" internal thrd for backwater device, provides 3" evaporation seal.

One piece plastic drain body

Trap provides full 3 Inch evaporation seal

2 Inch integral trap and solvent weld hub connection

1-1/2 Inch concealed factory plugged cleanout

Internally threaded 2 Inch FIP for backwater device

Durable polypropylene strainer, secured with two stainless steel screws

Bell Trap 6" x 6" for 1-1/2" x 2" PVC Pipe

Molded-in bell in lid

2" x 3" Low Profile PVC Drain, Screw-On Stainless Steel Strainer

Round screw-on stainless steel strainer

Solvent weld or no caulk installation

Tongue and groove clamping collar

Bevelled edge for recessed installation

2 x 3 Inch solvent weld

Bell Trap 9" x 9" for 3" x 4" PVC Pipe

Molded-in bell in lid