Flushometer Repair Parts

Get a high performance, low consumption alternative with a Sloan Flushmate cartridge. The pressure-assist technology was designed to satisfy high consumer expectations. Made with durable materials for long-lasting use

Incorporates the use of a skirt around the bottom of a vacuum breaker sleeve, which assists in handling high back pressure caused by low consumption closets and urinals and eliminates unsightly dribble and leakage

This kit includes a vacuum breaker insert, plastic spreader, and fiber washer

Allows air to pass through the vents in the side of the vacuum breaker tube to break the vacuum that is created at the end of the flush cycle

Repair G2 Optima Plush Flushometers with this EBV-129-AC sensor module

Single flush

Battery-powered, sensor-activated, single-flush retrofit conversion kit for exposed closet or urinal flushometers.

AC-powered infrared side mount sensor for automatic no-hands operation

Chrome-plated infrared sensor housing

Non-hold-open true mechanical override full flush button

Initial set-up range indicator light (first 10 min)

Duracell® with Duralock Power Preserve Technology-guaranteed for up to 10 years in storage

Low battery-flashing LED, User in View-flashing LED

Control circuit - Solid state, 6 VAC/7.6 VDC input 8 sec arming delay, 72 Hr sentinel flush, closet range: 2 - 3 sec arming delay, urinal range: 1 - 2 sec arming delay

No external volume adjustment to ensure water conservation

IInstallation tools provided

Service mode - features service mode which ignores targets for 10 min to enable fixture to be cleaned or serviced

Sensor type - infrared convergence type object lock detection

Sensor range - factory set at 22 - 42", if converted to urinal range setting 15 - 30"

Battery life - 3 years at 3000 flushes/month

This Sloan rebuild kit is designed to service all Sloan diaphragm type flushometers.

The inside kit includes the relief valve, molded disc, diaphragm and guide assembly.

This kit will solve most flushometer operation problems.

For Sloan 'Regal' Series

The H-541-ASD Repair Kit from Sloan includes everything you need to have that toilet working like new. This model designed to repair H-730-A control stops.

This the SloanEBV-1020-A flex tube diaphragm kit for urinal and closet flushometers. The Includes multiple regulators for both 3.5 GPF and 4.5 GPF flushometers

This genuine Sloan parts kit is designed to service all Sloan diaphragm type flushomters.

The inside kit includes the relief valve, molded disc, diaphragm and guide assembly. Also included are the vacuum breaker kit, handle repair kit and stop tail o-ring.

This kit will solve most flushometer operation problems.

For Sloan 'Regal' Series

The Sloan V-551-A Vacuum Breaker Repair Kit can be used in all Sloan Flushometers. The vacuum breaker acts as a one way valve that allows water to flow down thru it, but won’t allow water to siphon back up. It also allows air to pass thru the vents in the side of the vacuum breaker tube to break the vacuum that is created at the end of the flush cycle.

Use to repair Sloan Royal and Regal flush valve diaphragm

Made of durable materials that will endure the rigors of everyday use.

This genuine Vacuum Breaker repair kit for Sloan valves includes everything you need to have that toilet working like new.

This Sloan A-36-A Regal Flushometer Repair Kit is a pre-assembled drop in kit that replaces the main internal moving parts in Sloan Regal 4.5 GPF toilet/closet flushometers. The majority of flushometer malfunctions will be resolved with the replacement of this assembly.

Zurn E-Z Flush retrofit kit is designed to provide automatic flushing for urinal and water closet flush valves.

Converts handle-operated valve to sensor operation in less than five minutes

3-years battery life on 4 C cell batteries

Operates on four AA Duracell® batteries with a life expectancy up to three years under normal use

Will operate at all room light levels

Batteries service without the need to shut off water

Sensor and battery case water resistant

Installs in minutes and provide years of trouble free operation

Chrome-plated metal E-Z Flush® sensor unit

3-years warranty

Low battery indication light

Sensor - infrared, user in-view LED, low battery indicator light, 24 Hr auto-flush setting, 3 sec delay flush

Override button

Ultra energy efficient electronics

The inside kit includes the relief valve, molded disc, diaphragm and guide assembly. Also included are the vacuum breaker kit, handle repair kit and stop tail o-ring. This kit will solve most flushometer operation problems.

Repairs Sloan Valve Regal® 3.5 gpf Closet Flush Valve

Closet rebuild kit includes rubber diaphragm kit, vacuum breaker repair kit, handle repair kit and O-ring.

Spud size is 1-1/2"

This Sloan A-1102-A Royal Performance Kit is the ultimate hassle free upgrade for your 3.5GPF toilet Sloan flushometer. This kit includes everything you need to upgrade your flushometer to the best flushometer technology Sloan has to offer. Once you experience the performance and time savings these kits provide you will never go back to cleaning and replacing the old valve parts again.

Royal Dual Filtered Fixed Drop-In Kits can be used to upgrade Royal and Regal style diaphragm flushometers.

When used in a Royal valve manufactured prior to 1964, this kit MUST be used with an A-108 filter ring

Kit includes Royal dual-filtered diaphragm drop-in repair kit, handle repair kit with triple seal packing, high back pressure vacuum breaker repair kit, and tailpiece O-ring.

This genuine Sloan parts kit is designed to service all Sloan diaphragm type flushometers.

These kits are application specific, so please verify the correct usage (toilet or urinal) and gallons per flush (GPF)

This Sloan A-71 Inside Cover fits all diaphragm style Sloan flushometers. This black plastic cover sits on top of the diaphragm and under the metal outside cover.

This inside cover creates a water tight chamber which plays a crucial role in the proper operation of the flushometer.

Sloan's A-71 Inside Cover is used in Royal and Regal flush valve diaphragm.

Made with durable plastic to endure the rigors of everyday use.

A crack in this cover can cause chatter, an extended flush, or non-stop flushing.

Sloan OPTIMA SMO equipped Flushometers provide the ultimate in sanitary protection and automatic operation. There is no need for AC hookups or wall alterations. The Flushometer operates by means of a battery powered infrared sensor. Once the user enters the sensor's effective range and then steps away, the Side Mount Unit initiates the flushing cycle. This item can be used for water closets or urinals retrofit conversion kits.

Includes Flushometer actuator and sensor, Manual override flush button, 4 "C" batteries and installation tools

The SMO can be used on standard rough-in Sloan Royal, Regal, Crown and Naval brand Flushometers as well as on flush valves manufactured by Zurn and Helvex.

Low battery flashing LED with optional audio tone

Flush accuracy controlled by CID technology

Side Mount Operator (SMO) units DO NOT include a Valve Body, Supply Stop or Vacuum Breaker

For use with urinal or water closet

Angled sensor window

Optional 24 hr sentinel flush

ADA compliant Optima battery powered infrared sensor for automatic no-hands operation

This Sloan V-651-A High back pressure vacuum breaker repair kit includes everything you need to have that toilet working like new. For use with Sloan Royal, Regal, Crown and similar style flush-meters. Made of durable materials that will endure the rigors of everyday use.

For Regal series 3.5 GPF manual closet flush valve applications only