Pipe Hangers

Plastic Coated Wire Pipe Hanger - 1/2" Pipe Size 6" Length

Sharp nail points for easy driving

Fits copper tube sizes

Copper-plated 10 ga steel wire

Tube Talons secure PEX tubing products to wood surfaces. Manufacturer has approved the TubeTalon for use with: copper tube, CPVC tube, PEX/PB tube, CSST lines, flexible gas tubing, plastic/steel conduit, low voltage DataCom cable. Manufacturer suggests the TubeTalon be installed in alternating directions (so the fastener’s nail is on alternating sides of the tube being fastened) to ensure secure installation. Install fasteners at intervals described in local plumbing code for the type of pipe or tube being fastened. To install IPS tube, use the next larger size fastener, e.g. if you are fastening 1/2" IPS tube, use a 3/4" fastener.

Preloaded ring-shank nail ensures a permanent hold

Compatible with copper, PEX and CPVC

Tube is not damaged if nail is overdriven

For IPS piping (PVC and iron pipe) use next larger size tube talon

Install in alternating directions to ensure secure piping

Zinc-plated, continuous ring shank nail

UV-resistant, high density black polyethylene; 100% corrosion proof fastener body

Tube Talons secure PEX tubing products to wood surfaces. Manufacturer has approved the TubeTalon for use with: copper tube, CPVC tube, PEX/PB tube, CSST lines, flexible gas tubing, plastic/steel conduit, low voltage DataCom cable. Manufacturer suggests the TubeTalon be installed in alternating directions (so the fastener’s nail is on alternating sides of the tube being fastened) to ensure secure installation. Install fasteners at intervals described in local plumbing code for the type of pipe or tube being fastened. To install IPS tube, use the next larger size fastener, e.g. if you are fastening 1/2" IPS tube, use a 3/4" fastener.

Preloaded ring-shank nail ensures a permanent hold

Compatible with copper, PEX and CPVC

Tube is not damaged if nail is overdriven

For IPS piping (PVC and iron pipe) use next larger size tube talon

Install in alternating directions to ensure secure piping

Zinc-plated, continuous ring shank nail

UV-resistant, high density black polyethylene; 100% corrosion proof fastener body

Sioux Chief’s 553 series Hangs Tuff™ DWV pipe hanger is used where necessary to secure Schedule 40 DWV piping according to all national code requirements. Hanger is 100% corrosion proof and UV resistant. Hanger is impact resistant to 0°F, and is able to withstand temperatures up to 140°F

Two ring-shank nails conveniently supplied

Strong and rigid I-beam design keeps pipe secure

Can be glued to ABS or PVC pipe with all-purpose glue

100% corrosion proof, impact resistant ABS

1-5/8" zinc-plated, continuous ring shank

Contractor packs include one bulk bag of 500 nails

Patent #5,385,320

Secure hanger to stud or joist using both ring shank nails in accordance with national or local plumbing codes

Sioux Chief 551 series SiouxStrap, full clamp pipe hanger is used where necessary to secure ½" through 1" CTS supply lines in residential or commercial applications. Clamp shall be 100% corrosion proof and UV resistant. Clamp is impact resistant to 0°F, and be able to withstand continuous temperatures up to 160°F. Clamp includes preloaded, continuous ring shank, zinc-plated nail to resist rust. Clamp is designed to protect tube from damage if nail is overdriven. Clamp is compatible with CTS copper, PEX or CPVC tube.

Preloaded ring-shank nail ensures a permanent hold

Provides 1/4" stand-off

Snaps onto tube for hands-free installation

Isolates tube from surface to reduce heat loss and noise transfer

Allows tube to expand and contract

Compatible with copper, PEX and CPVC

Sioux Chief 551 series SiouxStrap, full clamp pipe hanger is used where necessary to secure ½" through 1" CTS supply lines in residential or commercial applications. Clamp shall be 100% corrosion proof and UV resistant. Clamp is impact resistant to 0°F, and be able to withstand continuous temperatures up to 160°F. Clamp includes preloaded, continuous ring shank, zinc-plated nail to resist rust. Clamp is designed to protect tube from damage if nail is overdriven. Clamp is compatible with CTS copper, PEX or CPVC tube.

Provides 1/4" stand-off

Preloaded ring-shank nail ensures a permanent hold

Isolates tube from surface to reduce heat loss and noise transfer

Snaps onto tube for "hands-free" installation

Compatible with copper, PEX and CPVC

Allows tube to expand and contract

Sioux Chief’s 553 series Hangs Tuff™ DWV pipe hanger is used where necessary to secure Schedule 40 DWV piping according to all national code requirements. Hanger is 100% corrosion proof and UV resistant. Hanger is impact resistant to 0°F, and is able to withstand temperatures up to 140°F

Two ring-shank nails conveniently supplied

Strong and rigid I-beam design keeps pipe secure

Can be glued to ABS or PVC pipe with all-purpose glue

100% corrosion proof, impact resistant ABS

1-5/8" zinc-plated, continuous ring shank

Contractor packs include one bulk bag of 500 nails

Patent #5,385,320

Secure hanger to stud or joist using both ring shank nails in accordance with national or local plumbing codes

Tube Talons secure PEX tubing products to wood surfaces. Manufacturer has approved the TubeTalon for use with: copper tube, CPVC tube, PEX/PB tube, CSST lines, flexible gas tubing, plastic/steel conduit, low voltage DataCom cable. Manufacturer suggests the TubeTalon be installed in alternating directions (so the fastener’s nail is on alternating sides of the tube being fastened) to ensure secure installation. Install fasteners at intervals described in local plumbing code for the type of pipe or tube being fastened. To install IPS tube, use the next larger size fastener, e.g. if you are fastening 1/2" IPS tube, use a 3/4" fastener.

Fastener is 100% corrosion proof and UV resistant

Fastener is impact resistant to 0 deg F, and is able to withstand continuous temperatures up to 160 deg F

Compatible with copper, PEX and CPVC

Nail - rust resistant, zinc plated yellow irradiate, continuous rink shank