Press Tools

The M12 Force Logic press tool is the single lightest press tool in the market today and represents a new level in portability and accessibility around installed pipe. Featuring a one-handed, in-line design, the M12 Force Logic press tool will operate nearly anywhere you can fit your arm. Utilizing Milwaukee® Redlink electronics, the M12 Force Logic press tool monitors the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration. Featuring the best calibration standard in the industry, the tool only require service every 32,000 crimps. This allows users up to 4X more connections between services, keeping the tool on the jobsite up to 4X longer than competitive units. When used with M12 force logic press jaws this tool delivers quality press connections on all major fitting brands including Viega® ProPress Systems, Elkhart® APOLLOXPRESS, and Grinnell® G-Press copper systems. Powered by the M12 red lithium battery means this is the only press system where you can cut, fasten and connect on one system.

Balanced, in-line design suitable for one-handed use

The smallest and lightest press tool in the market at only 3.8 lb

Industry leading 32000 cycles between calibration inspections

Press indicator provides visual assurance of a quality connection

M12 system provides up to 40+ solutions on one pack

Interchangeable jaws enable the quick adjustments from 1/2 - 1-1/4"

5-years tool, 2-years jaw warranty

2-years battery warranty

Milwaukee M18 Short Throw Press Tool with PEX Crimp Jaws

The 3 piece Milwaukee 49-16-2696 Black Iron Press Jaw Kit was designed for use with Viega Megapress Fittings and M18 Force Logic Press Tool. The Jaws provide a faster alternative to threading Black Iron 1/2" to 1" Schedule 5 to 40 pipe with the included 1/2", 3/4", and 1" Jaws.

Includes M18 1/2" Black Iron Press Jaw (49-16-2650B), M18 3/4" Black Iron Press Jaw (49-16-2651B), 1" Black Iron Press Jaw (49-16-2652B)

Designed for use on Viega® MegaPress® Fittings

Easy Opening Jaw Designed for One Handed Use

The Milwaukee 49-16-26-97 Black Iron Press Jaw Kit includes 1/2",3/4", and 1" Press Jaws and 1", 1-1/4", and 2" Press rings. Black iron press jaws and rings were designed for use with Viega Mega Press fittings. The press system provides a more efficient alternative to threading, and roll grooving 1/2" -2" Schedule 5 to 40 Black Iron Pipe connections. Milwaukee press rings have a unique pivoting design for press connections in close quarters and are up to 30% lighter than the leading competitor. This kit provides exceptional access for iron pipe fittings in confined spaces and increased productivity.

Designed for use on Viega® MegaPress® Fittings

Includes: (1) M18 1/2" Black Iron Press Jaw (49-16-2650B), (1) Ring Jaw 1 (49-16-2659),(1) M18 3/4" Black Iron Press Jaw (49-16-2651B),(1) M18 1" Black Iron Press Jaw (49-16-2652B),(1) M18 1-1/4" Black Iron Press Ring (49

Compatible with M18 FORCE LOGIC Press Tool (2773-20) and M18 FORCE LOGIC Long Throw Press Tool (2773-20L)

Our M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ with 1/2"-2" CTS Jaws is the industry’s first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can’t complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½” to 4” capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18™ REDLITHIUM™ CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.

Lightest, In-line Design for Unrivaled Access

Industry's first brushless press tool

Compatible with over 20 unique fitting systems

Prepress battery check ensures tool won't start a press it can't complete

ONE-KEY™ Wireless Reporting

Brushless motor enables 20% more run time & 10 % faster cycles

In-line design optimized for one-handed presses

Monitor & Report Successful Operation from Desktop & Mobile Devices

Only Press Tool with Security Capability

ONE-KEY™ Industry's Largest Tracking Network

Geofencing Tool Management

Introducing the next generation of RIDGID® Pressing Technology. Built to impress.

30% smaller tool increases maneuverability

17% lighter tool reduces operator fatigue

31% longer service interval (up to 42000 cycles) maximizes uptime

More than 400 presses per charge using advanced lithium 4 battery

Ultimate flexibility with the ability to switch between battery and AC power on the same tool

LED-light for continued operations in no or low-light environments

Contains Ridgid standard series pressing jaws and attachments (1/2" - 2")

The RIDGID® Model RP 210-B compact press tool is a fast and reliable way to join copper, stainless steel, PEX and multilayer fittings. This light and compact tool works great for professionals to connect 1/2 - 1-1/4" tubing.

The longest service interval available for compact press tools (32000 cycles)

Powerful 18 V Advanced Lithium 2 batteries that maximizes presses per charge for more uptime.

270 deg swiveling barrel to access tight spaces

Uses all Ridgid compact series pressing attachments

Ridgid® press tool attachments for ProPress® systems, when used with the appropriate Ridgid® press tool, are designed to mechanically press ProPress® fittings onto tubing to create a watertight and permanent seal.

40% lighter and 33% smaller than Standard Series jaws enabling them to fit into tight spaces

Designed in conjunction with the ProPress® system fittings, ensuring total system compatibility

Full lifetime warranty

Ridgid® press tool attachments for ProPress® systems, when used with the appropriate Ridgid® press tool, are designed to mechanically press ProPress® fittings onto tubing to create a watertight and permanent seal.

40% lighter and 33% smaller than Standard Series jaws enabling them to fit into tight spaces

Designed in conjunction with the ProPress® system fittings, ensuring total system compatibility

Full lifetime warranty

Ridgid® press tool attachments for ProPress® systems, when used with the appropriate Ridgid® press tool, are designed to mechanically press ProPress® fittings onto tubing to create a watertight and permanent seal.

40% lighter and 33% smaller than Standard Series jaws enabling them to fit into tight spaces

Designed in conjunction with the ProPress® system fittings, ensuring total system compatibility

Full lifetime warranty

ProPress® rings permit access in tighter spaces and serve as an excellent complement to your Ridgid® jaw sets. The swivel actuator allows a press tool to be placed +/-90 deg to the tube being pressed.

Designed in conjunction with the ProPress® system fittings, ensuring total system compatibility

C1 compact kits are designed for Ridgid® compact press tools (100-B, RP 200-B, RP 210-B)

Includes (1) operation manual, (1) v1 actuator, (1) 1/2" ring, (1) 3/4" ring, (1) 1" ring, (1) 1 1/4" ring, (1) carrying case