Pressure Reducing & Regulating Valves

B & G reducing valves protect heating and plumbing systems against excessive line pressures. They are factory set at specified limits although adjustment is easily made. Equipped with built-in-strainer and low inlet pressure check valve.

Fast fill feature reduces start-up time and labor

Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure

Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system

Highly resistant to corrosion

The Honeywell DS06 Dial Set® pressure regulating valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

Built-in Dial-Set - no gauge is needed to install or set static pressure

Non-corroding unitized cartridge - contains all working parts and is easily replaceable

Outlet adjustment range of 25 to 90 psi make it suitable for household, commercial, industrial and turf-and-irrigation applications

Install it just about anywhere, the internal and external threading allows for use in thread-by-thread, single-union or double-union configurations

Tap accessible from both sides to validate output

Built in strainer to simplify maintenance

10:1 maximum reducing ratio

Fabric reinforced diaphragm, stainless steel and engineered thermoplastics

Designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. All parts are quickly and easily serviceable without removing the valve from the line. The standard bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main.

Buna-n seat washer and o-ring

Maximum temperature: 180 deg F

FIP union x FIP

Replaceable in-line cartridge assembly

Bottom clean-out plug for easy service

Compact valve body is of all-bronze construction

Factory set at 50 psi, adjustable from 25 - 75 psi

Cartridge design resists mineral deposits and corrosion

Integral thermoplastic cage prevents galvanic corrosion

Reduces supply pressure up to 400 psi

Standard built-in bypass for pressure equalization

Materials - Bronze housing, corrosion resistant thermoplastic bell housing

Machined rod brass clean-out plug

Stainless steel seat and strainer

The Apollo® Model FF fast fill/feedwater pressure regulator provides the heating boiler with make up water at reduced inlet pressure with a high capacity purge/quick fill capability. They are manufactured in the US from proven ASTM grade materials for corrosion resistance and long life. Cartridge is replaceable in-line.

High capacity

Integral check and stainless steel strainer

Purge lever/fast fill feature

Rugged high temperature nitride elastomers

No steel cage screws to rust

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi

Integral stainless steel strainer

Replaceable seat module

High temperature resistant reinforced diaphragm for hot water

Bypass feature controls thermal expansion pressure

Stainless steel strainer, EPDM diaphragm/valve disc

The Apollo® pressure reducing valve Model PRE (36ELF Series) is designed to conserve water and protect water distribution systems by automatically reducing elevated supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance. Designed for easy in-line servicing with simple cartridge removal.

Sealed cage for vault installations

Built-in thermal expansion by-pass

Large area integral stainless steel strainer

Modular seat disc and strainer cartridge

High flow/high efficiency design

Stainless steel screen and adjusting screw and nut

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi (20.7

Replaceable seat module

Integral stainless steel strainer

Bypass feature controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel strainer, EPDM diaphragm/valve disc

The Honeywell DS06 Dial Set® pressure regulating valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

Built-in Dial-Set - no gauge is needed to install or set static pressure

Non-corroding unitized cartridge - contains all working parts and is easily replaceable

Outlet adjustment range of 25 to 90 psi make it suitable for household, commercial, industrial and turf-and-irrigation applications

Install it just about anywhere, the internal and external threading allows for use in thread-by-thread, single-union or double-union configurations

Tap accessible from both sides to validate output

Built in strainer to simplify maintenance

10:1 maximum reducing ratio

Fabric reinforced diaphragm, stainless steel and engineered thermoplastics

The Honeywell DS06 Dial Set® pressure regulating valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

Built-in Dial-Set - no gauge is needed to install or set static pressure

Non-corroding unitized cartridge - contains all working parts and is easily replaceable

Outlet adjustment range of 25 to 90 psi make it suitable for household, commercial, industrial and turf-and-irrigation applications

Install it just about anywhere, the internal and external threading allows for use in thread-by-thread, single-union or double-union configurations

Tap accessible from both sides to validate output

Built in strainer to simplify maintenance

10:1 maximum reducing ratio

Fabric reinforced diaphragm, stainless steel and engineered thermoplastics

ASME Section IV and CSA capacity certified bronze "uni-body" safety relief valve for protection of hot water boilers, systems and similar equipment. This valve prevents excessive thermal expansion build-up in plumbing systems, tank applications or tankless water heaters.

Corrosion resistant construction

Durable soft seat design for extended service

Prevents excessive thermal expansion build-up in plumbing systems, tank applications or tankless water heaters

Stainless steel spring

The Apollo® Model FF fast fill/feedwater pressure regulator provides the heating boiler with make up water at reduced inlet pressure with a high capacity purge/quick fill capability. They are manufactured in the US from proven ASTM grade materials for corrosion resistance and long life. Cartridge is replaceable in-line.

Integral check and stainless steel strainer

High capacity

Rugged high temperature nitride elastomers

Purge lever/fast fill feature

No steel cage screws to rust

B & G reducing valves protect heating and plumbing systems against excessive line pressures. They are factory set at specified limits although adjustment is easily made. Equipped with built-in-strainer and low inlet pressure check valve.

Fast fill feature reduces start-up time and labor

Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure

Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system

Highly resistant to corrosion

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi (20.7

Replaceable seat module

Integral stainless steel strainer

Bypass feature controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel strainer, EPDM diaphragm/valve disc

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi (20.7

Replaceable seat module

Integral stainless steel strainer

Bypass feature controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel strainer, EPDM diaphragm/valve disc

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi (20.7

Replaceable seat module

Integral stainless steel strainer

Bypass feature controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel strainer, EPDM diaphragm/valve disc

The Apollo® pressure reducing valve Model PRE (36ELF Series) is designed to conserve water and protect water distribution systems by automatically reducing elevated supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance. Designed for easy in-line servicing with simple cartridge removal.

Balanced piston design

Sealed cage for vault installations

Built-in thermal expansion by-pass

Large area integral stainless steel strainer

Modular seat disc and strainer cartridge

High flow/high efficiency design

Stainless steel screen and adjusting screw and nut

B & G reducing valves protect heating and plumbing systems against excessive line pressures. They are factory set at specified limits although adjustment is easily made. Equipped with built-in-strainer and low inlet pressure check valve.

Fast fill feature reduces start-up time and labor

Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure

Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system

Highly resistant to corrosion

Series X65B Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. The X65B is a cartridge style regulator and is orderable three ways: As a complete, ready-to-install regulator, or as a separate rough-in kit consisting of a bronze body with integral strainer, or as a separate cartridge assembly.

EPDM valve disc

Greater flow performance with lower fall off pressure for consistent operation

Cartridge Style valve enables quick and easy installation or service in-line

100% balanced valve, unique to Watts, provides reliable flow performance

Seat design reduces flow noise

Cartridge assemblies available in standard and high-pressure (hp) models

Full size range available rated to 400 psi to meet your commercial and residential applications

High performance thermoplastic integral seat cartridge

Standard construction includes sealed spring cage and corrosion resistant adjusting and cage screws for accessible outdoor or pit installations

Union inlet connection and tailpiece kits for solder, QuickConnect, PEX, CPVC and threaded to meet your commercial and residential applications

Bypass feature in cartridge assembly controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel integral strainer

Reinforced EPDM diaphragm

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi

Replaceable seat module

Integral stainless steel strainer

Bypass feature controls thermal expansion pressure

High temperature resistant reinforced diaphragm for hot water

Stainless steel strainer, EPDM diaphragm/valve disc