Push-Fit Fittings

SharkBite 2XL (commercial) is an extensive range of SharkBite fittings and ball valves available in sizes 1-1/4", 1-1/2" and 2". The SharkBite 2XL is compatible with copper, PEX and CPVC pipe and is certified for use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation.

Quick connect - no tools, soldering, clamps, unions or glue required

Safe-recessed release collar

Easy installation

EPDM O-ring, stainless steel grab ring, copper tube liner

Couplings are used to extend a run by connecting two pipes together. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bite fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

For copper, CPVC and PEX

Pressure tested to 200 psi

1000 - 2100 lb pull strength

Application temperatures from 0 - 250 deg F

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

Lead-free

Elbows join straight lengths of pipe, typically at angles of 45 deg or 90 deg, allowing for flow redirection. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bite fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

Pressure tested to 200 psi

For copper, CPVC and PEX

Application temperatures from 0 - 250 deg F

1000 - 2100 lb pull strength

Lead-free

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

SharkBite is the Push-Fit connection system that is really taking hold. It's the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

Instant Push-Fit connection for increased ease-of-use - no soldering required

Integral pipe liner for PEX installations which means no loose connections

EPDM O-ring, stainless steel grab ring, polysulfone tube support liner

Compact, robust lead-free

Corrosion resistant to improve longevity

Push-to-connect fittings require no solder, glue, unions or tools

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Provides piping support against lateral pipe forces

Quick connect and disconnect

Environmentally friendly

Easy installation

Couplings are used to extend a run by connecting two pipes together. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bite fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

For copper, CPVC and PEX

Pressure tested to 200 psi

1000 - 2100 lb pull strength

Application temperatures from 0 - 250 deg F

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

Lead-free

Elbows join straight lengths of pipe, typically at angles of 45 deg or 90 deg, allowing for flow redirection. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bite fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

Pressure tested to 200 psi

For copper, CPVC and PEX

Application temperatures from 0 - 250 deg F

1000 - 2100 lb pull strength

Lead-free

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

SharkBite is the Push-Fit connection system that is really taking hold. It's the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

Instant Push-Fit connection for increased ease-of-use - no soldering required

Integral pipe liner for PEX installations which means no loose connections

EPDM O-ring, stainless steel grab ring, polysulfone tube support liner

Compact, robust lead-free

Corrosion resistant to improve longevity

Push-to-connect fittings require no solder, glue, unions or tools

Quick connect and disconnect

Provides piping support against lateral pipe forces

Environmentally friendly

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Easy installation

Caps cover the end of pipes, stopping fluid flow and protecting pipe threads. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bit fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

Pressure tested to 200 psi

For copper, CPVC and PEX

Application temperatures from 0 - 250 deg F

1000 - 2100 lb pull strength

Lead-free

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

Repair couplings are used to repair a section of a PVC pipe that is leaking. They can also be used as a union in some cases. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bite fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

Use with copper and CPVC only

Includes disconnect tool

Make a mistake? No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-Fit fittings connect copper, PEX, and CPVC in any combinations and the disconnect clip makes it easy to take the connection apart when needed.

Caps cover the end of pipes, stopping fluid flow and protecting pipe threads. Wolv-Bite push connect fittings are the quickest fittings to use when connecting pipe together. Simply push the fittings onto the pipe and you are done. The advanced grip ring technology and the O-ring seal, provides a push perfect seal, ensuring the fitting does not leak. Wolv-Bit fittings are also designed to be removed using a disconnect clip so future repairs or piping can be completed.

Pressure tested to 200 psi

For copper, CPVC and PEX

Application temperatures from 0 - 250 deg F

1000 - 2100 lb pull strength

Lead-free

Common applications: potable water, glycol, compressed air, inert gas, cleaning chemicals, waste water, plant water, hydronic heating systems, vacuum, underground applications and more

SharkBite is the Push-Fit connection system that is really taking hold. It's the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

SharkBite is the Push-Fit connection system that is really taking hold. It's the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

Integral tube liner for PEX installations which means no loose connections

Made of DZR (Dezincification resistant) brass which provides a strong, durable fitting that is corrosion resistant

Designed for hydronic heating as well as potable water distribution

Innovative push-to-connect design makes for quick and easy installation

Push-to-connect fittings require no solder, glue, unions or tools

Corrosion resistant to improve longevity

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Provides piping support against lateral pipe forces

Quick connect and disconnect

Environmentally friendly

Easy installation

The SharkBite connection system makes any plumbing project fast and easy. Whether you need to repair a broken pipe or plumb a whole house, SharkBite is the Push-Fit solution for leak-free results. The system includes hundreds of products - dozens of fittings, a wide range of Push-Fit valves, even PEX tubing. Tested, proven, certified - SharkBite is your connection for plumbing project success.

Integral pipe liner for PEX installations which means no loose connections

Push-to-connect fittings allow the user to connect pipe in seconds with relative ease

Compact, robust lead-free DZR brass body

Push-fit fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit Concept, the ability to disconnect the fitting at will, means that the End Cap provides a leak proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the perfect tool for when water needs to be turned back on, overnight for instance, or if a job suffers an interruption. End Caps are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.

Suitable for use with PEX, CPVC and copper pipe

Push-fit connections

Lead-free and non toxic

Hot and cold water and hydronic heating applications

No risk of fire or flames

Truly demountable without damage to pipe or fitting

Corrosion free and no scale build-up

The CopperLoc® 903 non-removable push female adapter features a lead-free dezincification resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc® products are manufactured utilizing proven ASTM materials

No special tools required

Approved for underground installation (per local installation code)

Stainless steel grab ring, nylon support ring, EPDM O-ring, silicone lubrication

Copper and copper alloy push connect fitting

Push-Fit, tool free, permanent fitting

Pre-lubed for quick installation

The CopperLoc® 904 Non-Removable Push Male Adapter features a lead-free dezincification resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-Ring. CopperLoc® products are manufactured utilizing proven ASTM materials and standards. Proudly made In the USA.

No special tools required

Approved for underground installation (per local installation code)

Stainless steel grab ring, nylon support ring, EPDM O-ring, silicone lubrication

Copper and copper alloy push connect fitting

Push-Fit, tool free, permanent fitting

Pre-lubed for quick installation

The CopperLoc® 911 non-removable push tee features a lead-free dezincification resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc® products are manufactured utilizing proven ASTM materials and standards.

No special tools required

Approved for underground installation (per local installation code)

Stainless steel grab ring, nylon support ring, EPDM O-ring, silicone lubrication

Copper and copper alloy push connect fitting

Push-Fit, tool free, permanent fitting

Pre-lubed for quick installation

The PP Range of"-size push-in fittings are manufactured in white polypropylene with food grade EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications.

Quick disconnection without the need for tools

Push-fit technology

Food quality and suitable for potable liquids and pure water applications

High chemical resistance

Not suitable for compressed air and vacuum applications

The PP Range of"-size push-in fittings are manufactured in white polypropylene with food grade EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications.

Quick disconnection without the need for tools

Push-fit technology

Food quality and suitable for potable liquids and pure water applications

High chemical resistance

Not suitable for compressed air and vacuum applications

The PP Range of"-size push-in fittings are manufactured in white polypropylene with food grade EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications.

Quick disconnection without the need for tools

Push-fit technology

Food quality and suitable for potable liquids and pure water applications

High chemical resistance

Not suitable for compressed air and vacuum applications