Shelving & Storage Racks

The roller board made of high quality beech-Multiplex makes the WorkMo mobile. The modules can be fixated on top of each other by means of the integrated connecting clamp which is suitable for all WorkMo modules in width 2. The roller board is equipped with four solid rubber-steering rollers/casters, which are also suitable for uneven terrain. Two of the rollers are additionally equipped with lockable castors. The flat surface of the roller board makes it also suitable for other transport functions. The cargo can be fixated with a lashing strap to the roller board due to the embedded ProSafe floor lashing points in the base plate.

Dimensions (WxDxH): 493 x 612 x 144 mm

Weight: 14.41 lbs

Includes: 1 roller WorkMo 24

There are so many different options and ways you can customize your own WorkMo® “Work Mobility” system. In order to make it simple and easy to get started, we have created a basic “starter” guide. This will allow you to integrate 4 Stock- EZ® kits into your WorkMo®, provide you with storage drawers for tools and other parts, as well as roller wheels to make it easy for maneuvering.

Suitable for 4 Kit Boxes - Item #'s 70004 or 70006 (sold separately)

8 Service Case rails

Dimensions (WxDxH): 526 x 396 x 506 mm

Weight 16.5 lbs.

Maximum load capacity: 220 lbs

The universal aluminum wall hook van accessory attaches to the Shelf Staxx front or rear end panels and can be used to hang tools, cords, clothing, hard hats, etc.

In combination with the tool tray the WorkMo turns into a practical mobile workshop. The tool tray can be fixated to the WorkMo with the aid of a connecting clamp. The material used is resistant to a wide range of solvents, oils and fuel. The tray can be optionally subdivided with dividers (lengthwise or crosswise).

Dimensions (WxDxH): 520 x 365 x 103 mm

Weight: 1.1 lbs

Includes: 1 Tool tray

The document storage pocket is made of hard plastic and attaches to Shelf Staxx or Globelyst front and rear panels. It is designed for easy access to frequently used documents on side and rear doors.

Dimensions (WxDxH): 356 x 89 x 204 mm

Weight: 0.9 lbs

1 document storage pocket

1 hardware mounting kit

The storage pocket is made of tough plastic and attaches to the Shelf Staxx and Globelyst system end panels. It is sized to store aerosol cans and has plastic loops on the front for storing hand tools.

Dimensions (WxDxH): 353 x 134 x 123 mm

Weight: 0.85 lbs

1 Plastic storage pocket

1 hardware mounting kit

With the short dividers, the tool tray WorkMo (Ref. No.1000004390) can be subdivided transverse. As a result, creating compartments for the separation of e.g. Tools and consumables. The size of the compartment is again adapted to the Sortimo measuring system and can consequently be flexibly equipped with diverse inset boxes. Small components and tools from your T-BOXX or L-BOXX are thereby always ready at hand for your work. A maximum of three short dividers, inserted in the breadth, can be used for the subdivision of the tool tray. Using a combination of the long dividers is not possible.

Dimensions (WxLxH): 8 x 328 x 69 mm

Weight: 0.1 lbs

Includes: 1 short divider for tool tray

Secure I-BOXXes in place during transport with the I-BOXX Adapter Plate van accessory.  I-BOXX Adapter Plate attaches to the Shelf Staxx front or rear end panels (I-BOXX not included).

For fastening your accessories onto the WorkMo you require 4 screws each. The suitable screws can be ordered as a set containing 4 screws.

Aluminum divider set for a 42-6 drawer. Divider set includes one side to side divider, two front to back dividers, and connectors.

Weight: .5 lbs.

Fold the worktable up and take it with you by adding the Transport Rail to your WorkMo unit. The worktable can be placed on the transport rail and secured with single lashing points and a ProSafe cargo strap. Single lashing points and strap sold separately.

Dimensions (WxDxH): 526 x 60 x 108 mm

Weight: 4 lbs

Includes: 1 transport rail

The single lashing point ProSafe can be mounted to the side of the WorkMo unit. The ProSafe lashing strap or ProSafe bungee strap enables the secure transport of worktables.

Dimensions (WxLxH): 30 x 50 x 26 mm

Weight: 0.14 lbs

There are so many different options and ways you can customize your own WorkMo® “Work Mobility” system. In order to make it simple and easy to get started, we have created a basic “starter” guide. This will allow you to integrate 4 Stock- EZ® kits into your WorkMo®, provide you with storage drawers for tools and other parts, as well as roller wheels to make it easy for maneuvering.

Weight: 32.34 lbs

Dimensions (WxDxH): 526 x 396 x 506 mm

2 drawers height 6

Maximum load capacity: 220 lbs

1 MultiSlide pull out

1 MultiSlide pull out

Worktops and worktables mounted on the upper surface of the WorkMo module provide you with a perfect workstation at your jobsite. The worktable extension is an ideal expansion of your work station and the worktable without perforation provides the perfect solid surface for your daily work.

Dimensions (WxLxH): 1451 x 648 x 139 mm

Weight: 8.75 lbs

Includes: 1 worktable without perforation

The Big Storage Pocket van accessory features a rugged powder-coated steel construction.  Larger items can be stored within the Big Storage Pocket along with hand tools utilizing the side loops.  Big Storage Pockets can be installed directly onto Shelf Staxx front or rear end panels.

Hose holder van accessory is constructed out of hard plastic with a business card pocket and address field.  Hoses or electrical cables are safely stored away and quickly at hand.  Hose holder attaches to Shelf Staxx front or end panels.