Soldering Supplies

Wolverine Brass Lead-Free Solder is good for soldering copper pipe and fittings together.

Carries 25% more feet per solder per pound than 50/50

Free of lead, zinc, arsenic, cadmium, and nickel

A silver/tin/copper enhanced alloy made from the finest grade virgin materials

Excellent high temperature strength

Meets all State and Federal Specifications for potable water applications

The Wolverine Brass solder flux 8 oz. container is self Cleaning and 100% Lead Free

100% lead free

Self cleaning-no cleaning of copper necessary

Will not turn copper green

Will not freeze or liquefy

Good for 95/5 and all soft solders

Will not burn skin

The Wolverine Brass solder flux 4 oz. container is self Cleaning and 100% Lead Free

100% lead free

Self cleaning-no cleaning of copper necessary

Will not turn copper green

Will not freeze or liquefy

Good for 95/5 and all soft solders

Will not burn skin

Canfield SilverFlo is a lead-free solder for sealing, joining, coating, and filling of all solderable metals. Used in plumbing, heating, and indistrial applications. The solder to use on copper, brass, bronze, galvanized iron, steel, stainless steel and most other solderable alloys that require maximum reliability of solder joints.

Lead-free solder is alloyed from pure virgin metals

Economical to use when lead-free solder is required

Meets all State and Federal Specifications for potable water applications

Free of lead, zinc, arsenic, cadmium, nickel, and antimony

For use with pipe up to 2"

Wider pasty range allows for easier work

Utility Wonder's 14-216 paste soldering flux is the original self-cleaning, lead free soldering flux in a paste form specially formulated for sweat fitting work. No surface preparation is needed. It removed oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron (excluding aluminum) for proper solder bonding assuring leak free joints. This paste soldering flux is recommended for all soft solder work including 95/5 and is lead free. 8 oz container including brush.

Meets Federal Specification O-F-506 and GSA A-A-51145C

Cool Gel can be used to protect lead free valves during the soldering process and with any other soldering or brazing job to protect components and materials from costly heat damage. Cool Gels unique, no-drip gelled formula evaporates within 48 Hr, eliminating cleanup. Using Cool Gel is easier than using a heat blanket, and provides assurance the job can be completed without costly heat damage.

Protects lead free valves during soldering

Reduces the threat of costly heat damage to rubber seals and gaskets

Protects components and materials during soldering to avoid heat damage

Protects painted and finished surfaces from discoloration due to torch heat

Unique gelled formula sticks to surfaces without dripping or running off

Clear, non-staining gel leaves no residue, eliminating cleanup

Safe, non-toxic, harmless to skin and odorless

Taramet Sterling® 8 oz. Water Soluble Flux, Meets ANSI/NSF61 Codes, Meets ASTM B813-93 Specifications for Water Solubility

Cool Gel can be used to protect lead free valves during the soldering process and with any other soldering or brazing job to protect components and materials from costly heat damage. Cool Gels unique, no-drip gelled formula evaporates within 48 Hr, eliminating cleanup. Using Cool Gel is easier than using a heat blanket, and provides assurance the job can be completed without costly heat damage.

Protects lead free valves during soldering

Reduces the threat of costly heat damage to rubber seals and gaskets

Protects components and materials during soldering to avoid heat damage

Protects painted and finished surfaces from discoloration due to torch heat

Unique gelled formula sticks to surfaces without dripping or running off

Clear, non-staining gel leaves no residue, eliminating cleanup

Safe, non-toxic, harmless to skin and odorless

Canfield 95/5 is a lead-free solder safe for potable water systems as well as other applications (heating and air conditioning) with or without lead-free requirements.

Alloyed from virgin tin and antimony

95/5 meets both Federal and ASTM Specifications

Meets or exceeds all other applicable Government and Plumbing Code standards for strength, purity, and potable water system applications

Meets ASTM B32

The product of choice when forming a fillet.

Ideal product where non-toxic, lead-free soldering is required

Completely stops heat transfer down ferrous or non-ferrous pipe. Easily molds like clay to any shape you need. Can be used over and over. Removes quickly and cleanly after each application. No drip, mess or residue. Ideal for applications in plumbing, ac/r and maintenance. Simply stores in a 3/4 lb container.

Taramet Sterling® 1.7 oz. Water Soluble Flux, Meets ANSI/NSF61 Codes, Meets ASTM B813-93 Specifications for Water Solubility

Silversol is a premium grade lead-free high purity alloy. This solder is ideal for copper plumbing joints.

High silver bearing lead free alloy

Comprised of 95.5% tin, 4% copper and .5% silver

Melting temp range 416 deg F - 454 deg F

Compatible with most major grades of fluxes

ASTM B32, NSF/ANSI 61, NSF/ANSI 372, UPC and IAPMO R&T Compliant