Sump Pumps

The Beast Sump Pump from Wolverine Brass features a compact stainless steel body with a 1/2 HP power motor that pumps faster for longer life. The pumps cast iron impeller is capable of passing 3/4" spherical solids compared to competitors 1/2" rating. The Beast Sump Pump features a 9 foot power cord and convenient one screw float switch replacement.

Pumps faster and rests longer - 1/2 HP oil filled motor for maximum water removal (higher flow rate) and longer motor life

Compact size - 2" less in diameter versus the leading competitors 1/3 HP pump allowing it to fit in smaller sump pits

Durable construction - stainless steel body, shaft, and debris cage

Cast iron impeller that passes 3/4" spherical solid wastes, compared to competitors passing 1/2" spherical solids

Flexible - 9 ft. power cable and easy one screw float switch replacement

Better value - priced comparable to competitors 1/3 HP sump pump

3 year limited warranty

One of Zoeller Pumps most popular models with contractors. The M53 series pump is float-operated, submersible and has a 2-pole mechanical switch. This pump has an 1.5" discharge and is capable of passing 0.5" spherical solids. 9-ft cord included.

Engineered, glass-filled, plastic impeller with metal insert

Corrosion resistant, powder coated epoxy finish

Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available

Stainless steel screws, switch arm, guard and handle

No sheet metal parts to rust or corrode

Watertight, neoprene square ring between motor and pump housing

No screens to clog

Lower and upper bearings, oil-fed cast iron

Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor

Entire unit pressure-tested after assembly

Solid, buoyant, polypropylene float

Carbon and ceramic shaft seal

Cast iron switch case, motor and pump housing

Engineered thermoplastic base

A.Y. McDonald Guardian 747H20 Emergency Water Powered Back Up Sump Pump is protect your property during power outages or sump pump failure. Designed for ground water, sump crocks in homes, motels, and hotels, schools, hospitals, industrial buildings, computer and record storage rooms.

Designed for Intermittent or Continuous Use

Patented Activation Valve for Postive On, Positive Off

Made with High Quality Brass and PVC Materials for Corrosion Resistance

Supplied with Single Check Valve for Your Convenience

Designed for De-Watering

McDonald Hydro Drive Optimizes Performance

Minimum Pressure 29 PSI, Maximum 90 PSI

3/4" FNPT Inlet

Minimum Water Temperature 32°F

Discharge Size 1 1/4" PVC Sch. 80 (IPS)

Water-powered, emergency backup sump pump system

Horizontal OR Vertical installation capability allows FLEX to fit most sump applications

3 Year Warranty

No electricity or batteries required

Unit requires 3/4" inlet line to operate properly

1-1/4" suction pipe required for maximum performance (field installed)

Zoeller's Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump's upper and lower bearings are oil fed cast iron. The Flow-Mate's maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump's discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Corrosion resistant powder coated epoxy finish

Durable cast iron construction

Cast iron switch case, motor, pump housing and base

No sheet metal parts to rust or corrode

All castings are cast iron class 25-30 25000# tensile strength

Stainless steel screws, guard, handle, arm and seal assembly

Permanent split capacitor motor, oil filled and hermetically sealed, automatic reset thermal overload protection

Entire unit pressure tested after assembly

Watertight neoprene square ring between motor and pump housing

Zoeller's Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump's upper and lower bearings are oil fed cast iron. The Flow-Mate's maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump's discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Corrosion resistant powder coated epoxy finish

Durable cast iron construction

Cast iron switch case, motor, pump housing and base

No sheet metal parts to rust or corrode

All castings are cast iron class 25-30 25000# tensile strength

Stainless steel screws, guard, handle, arm and seal assembly

Permanent split capacitor motor, oil filled and hermetically sealed, automatic reset thermal overload protection

Entire unit pressure tested after assembly

Watertight neoprene square ring between motor and pump housing

Impeller Type: Non-clogging, engineered plastic vortex impeller

The Zoeller M63 submersible pumps is designed for use in residential or light commercial sump systems and water transfer applications. The M63 is based on the 50 Series sumo and features advanced switch technology for longer switch life. This model is constructed of the same heat-dissipating cast iron with powder coated epoxy finish, providing maximum pumping performance under the most extreme conditions. With Zoeller's cool run design, the hermetically-sealed, oil filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product. The heavy-duty power cord also includes an LED lighted plug to confirm power to the pump.

No screens to clog

Passes 1/2" (12 mm) spherical solids

Maximum temperature for effluent or dewatering: 130 °F (54 °C)

Watertight and dust-tight

1-1/2" NPT discharge

Cast iron impeller

Permanently oiled bearings

All cast iron construction

5-year warranty

Corrosion-resistant, powder coated epoxy finish

Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology

No sheet metal parts to rust or corrode

Viton outer switch boot

Watertight, neoprene square ring between motor and pump housing

The BN53 series pump is float-operated, submersible, has a 2-pole mechanical switch, and includes 10 piggyback variable level float switch . This pump has an 1.5" discharge and is capable of passing 0.5" spherical solids. 9-ft cord included.

Engineered, glass-filled, plastic impeller with metal insert

Corrosion resistant, powder coated epoxy finish

Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available

Stainless steel screws, switch arm, guard and handle

No sheet metal parts to rust or corrode

Watertight, neoprene square ring between motor and pump housing

No screens to clog

Lower and upper bearings, oil-fed cast iron

Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor

Entire unit pressure-tested after assembly

Solid, buoyant, polypropylene float

Carbon and ceramic shaft seal

Cast iron switch case, motor and pump housing

Engineered thermoplastic base

One of Zoeller Pumps most popular models with contractors. The M53 series pump is float-operated, submersible and has a 2-pole mechanical switch. This pump has an 1.5" discharge and is capable of passing 0.5" spherical solids. 35-ft cord included.

Engineered, glass-filled, plastic impeller with metal insert

Corrosion resistant, powder coated epoxy finish

Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available

Stainless steel screws, switch arm, guard and handle

No sheet metal parts to rust or corrode

Watertight, neoprene square ring between motor and pump housing

No screens to clog

Lower and upper bearings, oil-fed cast iron

Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor

Entire unit pressure-tested after assembly

Solid, buoyant, polypropylene float

Carbon and ceramic shaft seal

Cast iron switch case, motor and pump housing

Engineered thermoplastic base

With the Wolverine Brass Beast 2.0 Residential Sump Pump, protecting single-family homes from water damage is easier and more cost-effective than ever. Performance is still key, complete with a 1/2 horsepower continuous-duty operation, along with reliable activation and our most robust cast metal body.

Vertical Float Switch - provides the ability to be integrated into tighter spaces in smaller sump pits

Supported switch rail delivers reliable activation, meaning less potential for costly water damage.

1/2 HP motor: Continuous duty with permanent split capacitor and built-in thermal protection switch.

Robust cast metal body for durable, lasting operation.

3-year limited warranty

With the Wolverine Brass Beast Residential Sump Pump, protecting single-family homes from water damage is easier and more cost-effective than ever. Performance is key, complete with a 1/2 horsepower continuous-duty operation, along with reliable activation and our most robust cast metal body. Includes piggback float switch and glow plug which indicates the sump float has been triggered and the sump is pumping.

Vertical piggyback float switch provides the ability to be integrated into tighter spaces in smaller sump pits

Supported switch rail delivers reliable activation, meaning less potential for costly water damage

1/2 HP motor, continuous duty with permanent split capacitor and built in thermal protection switch

Robust cast metal body for durable, lasting operation

Plastic, rust proof impeller

Glow plug to indicate sump pump operation