Thread Sealants

8oz. Teflon Paste, Professional, Heavy Duty

Lead free for use on threads or flanges

Non-staining, non-toxic, non-conducting, non-corrosive and bright white

Withstands high temperatures (200° to 500° F)

Withstands pressures to 10,000 psi

Applies to iron pipe, copper and plastic threads

Good for high pressure steam, oil, gasoline, and most other solvents, various gases and refrigerants

Also good for acids, alkalies, salt water and fuel

RectorSeal® T Plus 2® is a non-hardening thread sealant containing PTFE plus synthetic fibers. These fibers are dispersed in a resinous base combined with inert mineral fillers to provide maximum sealing performance. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal® T Plus 2® is non-toxic in accordance with NSF Standard 61. In addition, it is approved and listed with the Canadian Standards Association (CSA).

PTFE enriched

Non-staining and non-separating

Allows immediate pressurization

Lubricates and protects threads

For use with potable water (hot or cold)

Low odor

Non-setting and will not dry out in the can

Lead free and contains no other metals

Formulated for plastic and metal pipe

For pressures up to 10000 psi (liquids) and 2000 psi (gases)

Smooth easy application

Multipurpose

Non-flammable

RectorSeal® No. 5® is our most popular thread sealant. It has withstood the test of time in a variety of uses and is widely known as the "standard of the industry". RectorSeal® No. 5® is a soft-setting, slow-drying thread sealant made from special inert fillers dispersed in an oleoresinous base to facilitate its application to threaded pipe connections. RectorSeal® No. 5® is a unique, versatile and reliable sealant that is non-toxic in accordance with NSF Standard 61-G & 372. In addition, it is Underwriters Laboratories Inc. (UL) classified, listed under the Uniform Plumbing Code (IAPMO) File No. 1282, and it is approved and listed with the Canadian Standards Association (CSA).

For use with potable water (hot or cold)

Lead free and contains no other metals

Soft setting, slow drying

Brushable from 20 - 140 deg F

Will not dry out in the can

Multipurpose – wide range of service uses

Immediate pressurization on pipe up to 2 Inch and 100 psi

For pressure up to 12000 psi (liquids) and 2600 psi (gases)

Smooth easy application

Permits easy break out with no damage to threads

Economical – requires only a small amount

Reduces friction to allow tighter joint makeup

Lubricates and protects threads

PIPETITE-STIK is LA-CO’s original thread sealant. It was designed for professional pipefitters who needed an efficient way to seal pipe. It easily fits inside a shirt pocket for convenient mobility.

Safe, non-toxic, non-drying

Do not use on oxygen service; use oxytite paste or Slic-Tite PTFE tape

Sure seal

Easy to apply

Made in USA