Tank Lids, Kits & Accessories

Closed Coupled Tank Kit w/American Standard Recessed Gasket & 3 Bolts

Each bolt comes with: Two heavy brass washers. Two cloth inserted rubber washers to ensure they don't squeeze out of place during installation. Two solid brass hex nuts and 56508 gasket

Heavy brass bolts made from solid 5/16" x 3" brass with a 7/8" diameter slotted head

Close Coupled Tank Kit w/ Recessed Gasket & 2 bolts. LARGEST BOLT HEAD IN THE INDUSTRY! Each bolt comes w/ 2 heavy brass washers, 2 cloth inserted rubbers washers and 2 solid brass hex nuts. MADE IN USA.

Each bolt comes with: Two heavy brass washers. Two cloth inserted rubber washers to ensure they don't squeeze out of place during installation. Two solid brass hex nuts.

Heavy brass bolts made from solid 5/16" x 3" brass with a 7/8" diameter slotted head

Close Coupled Tank Kit w/Regular Gasket & 2 Bolts

Each bolt comes with: Two heavy brass washers. Two cloth inserted rubber washers to ensure they don't squeeze out of place during installation. Two solid brass hex nuts and 56507 gasket

Heavy brass bolts made from solid 5/16" x 3" brass with a 7/8" diameter slotted head

The secure solution for supporting wall mounted toilets. The Big John toilet support mounts underneath the toilet bowl working in conjunction with the existing wall carrier to redistribute the weight and increasing the weight capacity from 350 lb to over

Simple to install - installation instructions to the right, or view the installation videos below

Discreetly mounts under most wall mounted toilets, providing additional vertical support

Maintains the cleaning ability of a wall-mounted fixture

Specially engineered leg base can be raised up to 4" for cleaning access

Leg made of high impact ABS, with the carriage and foot made of a chemical and stain resistant flexible PVC that forms to the contour of the toilet

Complies with center of excellence requirements. Perfect for hospitals, nursing homes, government facilities, stadiums, airports, theaters, office buildings and virtually every wall mounted toilet

Top of short toilet support swivels

The SK1000U universal wall mounted toilet support (now called The Buttress) is crafted out of 1018 low carbon steel which has a Rockwell hardness of B72, a melting point of 2800 deg F, and has a yield strength of 55000 psi. The white coating is a thermoset powder coated baked on enamel. The process has five steps. A pre-wash, a rust prevention, a pre-heating, powder paint spray, and a 450 deg F curing bake. A rubber wedge bumper is extruded from white commercial grade FDA Buna-N rubber. It is non toxic, non allergenic, non marking, and oil resistant. The temperature range is of -25 to 180 deg F. The adhesive for the rubber wedge is 3M Scotch VHB 100% acrylic "closed" cell (for infection control purposes) foam tape with a temperature range of -40 to 200 deg F. The threaded insert is made of corrosion resistant reinforced polymide with a brass threaded insert. This has a temperature range of -85 to 500 deg F. The plastic rivets are of a black Nylon 6/6 with a temperature range to -40 to 170 deg F. The plastic end cap is made of black ABS plastic with a temperature range of -60 to 340 deg F. The adjustable foot is made out of a yellow zinc plated steel. The nuts, bolts, and washers are made from 18/8 stainless steel.

Designed to support toilets for bariatric patients and the obese

Easily installs in less than 20 min using existing carrier nuts

Patented spring feature allows leg to kick back for cleaning

Installs without removing toilets

Supports up to 1,000 pounds