Wall Anchors

WingIts

Model #: SRGBW40

SKU: 51512

WingIts SRGBW40 GBW Series Stainless Steel Hollow Reverse Grab Bar Fastener (Each) For 2 x 3 Inch Studded Walls, 1-1/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Waterproof and fireproof

Handles vector forces 360 deg

Used to install WINGITS® grab bars

WINGITS® SRGBW40 reverse WINGITS® is used in walls framed with 2 x 3’s (2-1/2 Inch hollow or larger)

Must be used in vertical walls only

When installing into ceramic wall tile, plaster or marble, use the APACHE200™ industrial grade carbide drill bit for quick, precise holes

Proudly made in the USA

1-1/4 Inch holes required

Designed for 2 x 4 Inch hollow walls and wall substrates from 1/4 - 1-1/2 Inch thick

The SRGBW40 is 100% waterproof utilizing 3Ms VHB tape

It is rated up to 800 lb in drywall and tile and in 1/4 Inch fiberglass tub surrounds

$38.05

0 In Stock

WingIts

Model #: MAW35HP-2

SKU: 51508

WingIts Master Anchor MAW35HP-2 MAW Series Plastic Standard Hollow Wall Anchor with Hook Plate (2/Pack), #8-32, 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Water-resistant and fire-resistant

Handles vector forces 360 deg

Recommended for low-profile and tilting mounts (not full motion mounts)

WINGITS® MAW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

It can install into any hollow wall in just minutes with use of a drill and our APACHE200™ or other equivalent 3/4 Inch drill bit

Proudly made in the USA

$6.34

60 In Stock

WingIts

Model #: MAW35B100

SKU: 51505

WingIts Master Anchor MAW35B100 MAW Series Plastic Standard Hollow Wall Anchor (100/Pack), #8-32, 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Water-resistant and fire-resistant

Handles vector forces 360 deg

Recommended for low-profile and tilting mounts (not full motion mounts)

WINGITS® MAW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

It can install into any hollow wall in just minutes with use of a drill and our APACHE200™ or other equivalent 3/4 Inch drill bit

Proudly made in the USA

$214.92

0 In Stock

PlumbMaster Approved

SKU: 60056

Plastic Wall Anchor

$0.21

750 In Stock

WingIts

Model #: MAWOS35

SKU: 51509

WingIts Master Anchor MAWOS35 MAW Series Plastic Standard Hollow Wall Anchor with Offset (2/Pack), #8-32, 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Water-resistant and fire-resistant

Handles vector forces 360 deg

Recommended for low-profile and tilting mounts (not full motion mounts)

WINGITS® MAW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

It can install into any hollow wall in just minutes with use of a drill and our APACHE200™ or other equivalent 3/4 Inch drill bit

Proudly made in the USA

The MAWOS35 Master Anchor™ with offset for minimal reveal is safe for indoor and outdoor use

$5.52

0 In Stock

WingIts

Model #: MAW35-2

SKU: 51507

WingIts Master Anchor MAW35-2 MAW Series Plastic Standard Hollow Wall Anchor (2/Pack), #8-32, 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Water-resistant and fire-resistant

Handles vector forces 360 deg

Recommended for low-profile and tilting mounts (not full motion mounts)

WINGITS® MAW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

It can install into any hollow wall in just minutes with use of a drill and our APACHE200™ or other equivalent 3/4 Inch drill bit

Proudly made in the USA

$5.44

0 In Stock

WingIts

Model #: MAW35B24

SKU: 51506

WingIts Master Anchor MAW35B24 MAW Series Plastic Standard Hollow Wall Anchor (24/Pack), #8-32, 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Water-resistant and fire-resistant

Handles vector forces 360 deg

Recommended for low-profile and tilting mounts (not full motion mounts)

WINGITS® MAW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

It can install into any hollow wall in just minutes with use of a drill and our APACHE200™ or other equivalent 3/4 Inch drill bit

Proudly made in the USA

$58.24

2 In Stock

WingIts

Model #: RESGBW35

SKU: 51510

WingIts Master Anchor RESGBW35 RESGBW Series Black Plastic Hollow Grab Bar Fastener (2/Pack), 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

No caulk needed - self waterproofing and fire-resistant

Handles vector forces 360 deg

Used to install WINGITS® grab bars

WINGITS® RESGBW35 are used for hollow wall construction and come standard with a stainless steel 3-1/2 Inch screw for walls up to 1-1/4 Inch thick

Must be used in vertical walls only

When installing into ceramic wall tile, plaster or marble, use the APACHE200™ industrial grade carbide drill bit for quick, precise holes

Proudly made in the USA

3/4 Inch holes required

Designed for 2 x 3 Inch or larger hollow walls and wall substrates from 1/4 - 1.3 Inch thick

Limited lifetime warranty

$16.68

6 In Stock

WingIts

Model #: BAW30

SKU: 51513

WingIts BAW30 Plastic Hollow Grab Bar Fastener (2/Pack), 3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen - keeps curved shower rods from sagging

Water-resistant and fire-resistant

Handles vector forces 360 deg

Used to install Wingits® curved shower rods and OVAL™ bath accessories

Use BAW30 when adequate structural blocking is not present

Proudly made in the USA

$11.65

13 In Stock

Plastic Wall Anchor, White, 1/4 Inch Dia

PlumbMaster Approved

SKU: 60055

Plastic Wall Anchor, White, 1/4 Inch Dia

$0.21

708 In Stock

Fastener Products PLASANC-1416 Plastic Wall Anchor, #14-16

PlumbMaster Approved

SKU: 63746

Fastener Products PLASANC-1416 Plastic Wall Anchor, #14-16

$0.21

79 In Stock

PlumbMaster Approved

SKU: 63745

Plastic Wall Anchor, #6-8

$0.21

910 In Stock

Nylon Hollow Wall Anchor, White, 3/8 Inch Dia

PlumbMaster Approved

SKU: 63826

Nylon Hollow Wall Anchor, White, 3/8 Inch Dia

Predrills precise hole in gypsum wall board

No hole preparation required

Provides strong engagement in 3/8, 1/2 or 5/8 gypsum wallboard

Increased load capacity

Only requires a Phillips screw driver

Saves time

$0.27

580 In Stock

Zinc Medium Duty Hollow Flat Head Wall Anchor

PlumbMaster Approved

SKU: 63828

Zinc Medium Duty Hollow Flat Head Wall Anchor

Self-Drilling, One-Piece Design

Easy to Install, Easy to Remove

Corrosion Resistant

$1.00

400 In Stock

Nylon Hollow Wall Anchor, White, 1/2 Inch Dia

PlumbMaster Approved

SKU: 63827

Nylon Hollow Wall Anchor, White, 1/2 Inch Dia

Predrills precise hole in gypsum wall board

Provides strong engagement in 3/8, 1/2 or 5/8 gypsum wallboard

No hole preparation required

Only requires a Phillips screw driver

Increased load capacity

Saves time

$0.48

604 In Stock

PlumbMaster Approved

SKU: 63829

Heavy-Duty Hollow Wall Anchor, #8

Toggle anchor delivers 70 - 150 lb load capacity

Attach heavier loads to dry wall

E-Z Ancor drill point

Predrills precise hole in gypsum wall board

No hole preparation required

Quick one tool installation

Only requires a Phillips screw driver

Saves time

$2.67

174 In Stock

PlumbMaster Approved

SKU: 63830

Zinc Die-Cast Toggle

Self-drilling, design with sharp center point

Dual radium cutting edge drills cleanly

No strip-out - high helix thread provides strong seating for anchor

$2.54

331 In Stock

WingIts

Model #: GBW40

SKU: 51511

WingIts GBW40 GBW Series Stainless Steel Phillips Wall Anchor, 2-3/4 Inch

Eliminate the need for structural blocking

Guaranteed to never loosen

Waterproof and fireproof

Handles vector forces 360 deg

Used to install WINGITS® grab bars

WINGITS® GBW40 Standard WINGITS® is used in walls framed with 2 x 4’s (3-1/2 Inch hollow or larger)

Must be used in vertical walls only

When installing into ceramic wall tile, plaster or marble, use the APACHE200™ industrial grade carbide drill bit for quick, precise holes

Proudly made in the USA

1-1/4 Inch holes required

Designed for 2 x 4 Inch hollow walls and wall substrates from 1-1/2 - 2-1/2 Inch thick

The GBW40 is 100% waterproof utilizing 3Ms VHB tape

It is rated up to 800 lb in drywall and tile and in 1/4 Inch fiberglass tub surrounds

$40.44

26 In Stock

Shop by Brand

Shop by Price

Shop by Sub Brand

Shop by Type

Shop by Load Capacity

Wall Anchors

WingIts SRGBW40 GBW Series Stainless Steel Hollow Reverse Grab Bar Fastener (Each) For 2 x 3 Inch Studded Walls, 1-1/4 Inch

WingIts Master Anchor MAW35HP-2 MAW Series Plastic Standard Hollow Wall Anchor with Hook Plate (2/Pack), #8-32, 3/4 Inch

WingIts Master Anchor MAW35B100 MAW Series Plastic Standard Hollow Wall Anchor (100/Pack), #8-32, 3/4 Inch

Plastic Wall Anchor

WingIts Master Anchor MAWOS35 MAW Series Plastic Standard Hollow Wall Anchor with Offset (2/Pack), #8-32, 3/4 Inch

WingIts Master Anchor MAW35-2 MAW Series Plastic Standard Hollow Wall Anchor (2/Pack), #8-32, 3/4 Inch

WingIts Master Anchor MAW35B24 MAW Series Plastic Standard Hollow Wall Anchor (24/Pack), #8-32, 3/4 Inch

WingIts Master Anchor RESGBW35 RESGBW Series Black Plastic Hollow Grab Bar Fastener (2/Pack), 3/4 Inch

WingIts BAW30 Plastic Hollow Grab Bar Fastener (2/Pack), 3/4 Inch

Plastic Wall Anchor, White, 1/4 Inch Dia

Fastener Products PLASANC-1416 Plastic Wall Anchor, #14-16

Plastic Wall Anchor, #6-8

Nylon Hollow Wall Anchor, White, 3/8 Inch Dia

Zinc Medium Duty Hollow Flat Head Wall Anchor

Nylon Hollow Wall Anchor, White, 1/2 Inch Dia

Heavy-Duty Hollow Wall Anchor, #8

Zinc Die-Cast Toggle

WingIts GBW40 GBW Series Stainless Steel Phillips Wall Anchor, 2-3/4 Inch