Water Heater Elements

Double Throw Combination Unit, High Electrical Capacity, Calibration range High Limit Control (170° F +/- 5° F) & the Thermostat (120° F +/- 5), Temperature Range (90° F to 150° F)

High limit control provides added protection against overheating and set to cut off at 220 deg F

New Style water heater control device that combines a thermostat and a high limit control in one unit

Generally used to control the upper element on a two element tank

Welded construction which uses a temperature sensitive bimetal disc to deliver snap action to the contacts

Provides a trip free manual reset that operates at a non-adjustable factory calibrated temperature

High electrical capacity

Controls are 100% operation checked

Copper-Sheathed Water Heater Element, Screw-in, 4500 watts at 240 volts, 13-9/16" long

Copper-sheathed, screw in type water heater element with gasket

High watt density

Completely tinned to minimize galvanized or action in glass-lined, galvanized or stone lined tanks

Used as original equipment by all tank manufacturers

1" diameter thread to tank

Single Throw Thermostat for Electric Water Heater, High Electrical Capacity, Calibration range - 120° F +/- 5° F, Temperature Range - 90° to 150° F

Welded construction which uses a temperature sensitive bimetal disc to deliver snap action to the contacts

"New Style" single throw thermostat for electric water heaters

Controls are 100% operation checked

High electrical capacity

Single Throw Combination Unit, High Electrical Capacity, Calibration range High Limit Control (170° F +/- 5° F) & the Thermostat (120° F +/- 5), Temperature Range (90° F to 150° F)

High limit control provides added protection against overheating and set to cut off at 220 deg F

New Style water heater control device that combines a thermostat and a high limit control in one unit

Generally used to control the upper element on a two element tank

Welded construction which uses a temperature sensitive bimetal disc to deliver snap action to the contacts

Provides a trip free manual reset that operates at a non-adjustable factory calibrated temperature

High electrical capacity

Controls are 100% operation checked

Alloy Sheathed Water Heater Element, Screw Plug Type, 4500 watts at 240 volts, 16-3/8" long

Nickel base alloy sheathed water heater element with gasket

Will last longer than copper sheathed element in free air and less likely to overheat when immersed in mineral deposits

Used by several water heater manufacturers as original equipment

1" diameter thread to tank

Alloy Sheathed Water Heater Element, Square Flange Type, 4500 watts at 240 volts, 16-1/4" long

Nickel base alloy sheathed water heater element with gasket

Will last longer than copper sheathed element in free air and less likely to overheat when immersed in mineral deposits

Used by several water heater manufacturers as original equipment

Bolt holes 2-1/4" C x C

Copper-Sheathed Water Heater Element, Flanged, 4500 watts at 240 volts, 13-9/16" long

High watt density

Water heater element with gasket designed for use with recessed square flanges having four mounting holes 2-1/2" bolt circles

Bolt holes 2-1/4" C x C

Copper-Sheathed Water Heater Element, Flanged, 1500 watts at 120 volts, 7-5/8" long

High watt density

Water heater element with gasket designed for use with recessed square flanges having four mounting holes 2-1/2" bolt circles

Bolt holes 2-1/4" C x C