Water Heater Connectors

7/8" OD Copper Water Heater Connectors, 3/4" FIP x 3/4" C x 24" length

Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

Superior galvanic corrosion resistance

Less torque to seal against the pliable nitride rubber washer, especially on rough nipple surfaces

No dielectric union needed with installation, dielectric is built-in to the design of the connector

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

7/8" OD Copper Water Heater Connectors, 3/4" FIP x 3/4" C x 15" length

7/8" OD Copper Water Heater Connectors, 3/4" FIP 24" length

Superior galvanic corrosion resistance

Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

No dielectric union needed with installation

Dielectric is built-in to the design of the connector

Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

100% compliant

7/8" OD Copper Water Heater Connectors, 3/4" FIP x 3/4" C x 18" length

Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

Superior galvanic corrosion resistance

Less torque to seal against the pliable nitride rubber washer, especially on rough nipple surfaces

No dielectric union needed with installation, dielectric is built-in to the design of the connector

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

7/8" OD Copper Water Heater Connectors, 3/4" FIP 18" length

Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

Superior galvanic corrosion resistance

Dielectric is built-in to the design of the connector

No dielectric union needed with installation

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces

100% compliant

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

7/8" OD Copper Water Heater Connectors, 3/4" FIP 15" length

Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

Superior galvanic corrosion resistance

Dielectric is built-in to the design of the connector

No dielectric union needed with installation

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces

100% compliant

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

SharkBite water heater connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel.

Lead-free DZR brass fittings, braided stainless steel hose

Innovative Push-Fit design makes for quick and easy installation

Push-Fit connections require no solder, glue or unions

Decreases the amount of time and effort needed to connect water heater to pipe

Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)

Corrosion resistant to improve longevity

Meets IAPMO, UPC, IPC and cUPC requirements

Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

Ease of use - no soldering or glue

Corrosion is no match for BrassCraft's Copper-Flex Water Heater Connectors. Constructed of seamless copper tubing, Copper-Flex water heater connectors are the professional's choice for water heater installations. Featuring an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation helps protect against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs.

Superior galvanic corrosion resistance - patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

No dielectric union needed with installation

Dielectric is built-in to the design of the connector

Less torque to seal against the pliable nitride rubber washer, especially on rough nipple surfaces

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

For residential and commercial applications

100% compliant

Designed, machined and assembled in the USA

Corrosion is no match for BrassCraft's Copper-Flex Water Heater Connectors. Constructed of seamless copper tubing, Copper-Flex water heater connectors are the professional's choice for water heater installations. Featuring an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation helps protect against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs.

Superior galvanic corrosion resistance - patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

No dielectric union needed with installation

Dielectric is built-in to the design of the connector

Less torque to seal against the pliable nitride rubber washer, especially on rough nipple surfaces

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

For residential and commercial applications

100% compliant

Designed, machined and assembled in the USA