Skip to content Skip to navigation menu
List Price:


153 In Stock

Product details

The "Waste-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2 Inch spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

  • Float-operated, 2-pole mechanical switch
  • Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
  • Cast iron impeller
  • Not affected by materials normally found in drainage and sewage pumps
  • Stainless steel screws, bolts, handle, guard and arm and seal assembly
  • Neoprene square ring and gasket
  • Oil-filled, hermetically-sealed motor
  • Oil-lubricated bearings
  • Carbon and ceramic shaft seal
  • Passes 2 Inch (50 mm) spherical solids
  • 2 Inch female and 3 Inch NPT male discharge
  • On point - 12 Inch (30 cm) (automatic units)
  • Off point - 4 Inch (10 cm) (automatic units)
  • Corrosion resistant, powder coated epoxy finish
  • Technical Specs

    Technical Details
    Switch Type: Vertical
    Height: 14-9/32 Inch
    Voltage Rating: 115 V
    Color/Finish: Powder Coated Epoxy
    Phase: 1-Phase
    Bearing Type: Oil Lubricated
    Operating Temperature: 130 deg F
    HP Rating: 1/2 HP
    Max Head: 21-1/2 ft
    Type: Automatic
    Diameter: 13-1/16 Inch
    Series: 260 Series
    Speed: 1750 RPM
    Flow Rate: 128 gpm
    Amperage Rating: 10.4 A
    Thermal Protection: Yes
    Frequency Rating: 60 Hz
    Discharge Size: 2 Inch NPT
    Cord Length: 10 ft
    Material: Cast Iron

    Product Reviews

    Questions & Answers